Only OMAP1 devices use the omap_dm_timer_reset() and so require the
omap_dm_timer_wait_for_reset() and __omap_dm_timer_reset() functions.
Therefore combine these into a single function called omap_dm_timer_reset()
and simplify the code.
The omap_dm_timer_reset() function is now the only place that is using the
omap_dm_timer structure member "sys_stat". Therefore, remove this member and
just use the register offset definition to simplify and clean-up the code. The
TISTAT register is only present on revision 1 timers and so check for this in
the omap_dm_timer_reset() function.
Please note that for OMAP1 devices, the TIOCP_CFG register does not have the
clock-activity field and so when we reset the timer for an OMAP1 device we
only need to configure the idle-mode field in the TIOCP_CFG register.
Signed-off-by: Jon Hunter <jon-hun...@ti.com>
---
arch/arm/plat-omap/dmtimer.c | 50 ++++++++++++++++++-----------
arch/arm/plat-omap/include/plat/dmtimer.h | 23 -------------
2 files changed, 31 insertions(+), 42 deletions(-)
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 9deeb30..4c28452 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -99,32 +99,39 @@ static void omap_timer_restore_context(struct omap_dm_timer
*timer)
timer->context.tclr);
}
-static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer)
+static int omap_dm_timer_reset(struct omap_dm_timer *timer)
{
- int c;
+ u32 l, timeout = 100000;
- if (!timer->sys_stat)
- return;
+ if (timer->revision != 1)
+ return -EINVAL;
- c = 0;
- while (!(__raw_readl(timer->sys_stat) & 1)) {
- c++;
- if (c > 100000) {
- printk(KERN_ERR "Timer failed to reset\n");
- return;
- }
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
+
+ do {
+ l = __omap_dm_timer_read(timer,
+ OMAP_TIMER_V1_SYS_STAT_OFFSET, 0);
+ } while (!l && timeout--);
+
+ if (!timeout) {
+ dev_err(&timer->pdev->dev, "Timer failed to reset\n");
+ return -ETIMEDOUT;
}
-}
-static void omap_dm_timer_reset(struct omap_dm_timer *timer)
-{
- omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
- omap_dm_timer_wait_for_reset(timer);
- __omap_dm_timer_reset(timer, 0, 0);
+ /* Configure timer for smart-idle mode */
+ l = __omap_dm_timer_read(timer, OMAP_TIMER_OCP_CFG_OFFSET, 0);
+ l |= 0x2 << 0x3;
+ __omap_dm_timer_write(timer, OMAP_TIMER_OCP_CFG_OFFSET, l, 0);
+
+ timer->posted = 0;
+
+ return 0;
}
int omap_dm_timer_prepare(struct omap_dm_timer *timer)
{
+ int rc;
+
/*
* FIXME: OMAP1 devices do not use the clock framework for dmtimers so
* do not call clk_get() for these devices.
@@ -140,8 +147,13 @@ int omap_dm_timer_prepare(struct omap_dm_timer *timer)
omap_dm_timer_enable(timer);
- if (timer->capability & OMAP_TIMER_NEEDS_RESET)
- omap_dm_timer_reset(timer);
+ if (timer->capability & OMAP_TIMER_NEEDS_RESET) {
+ rc = omap_dm_timer_reset(timer);
+ if (rc) {
+ omap_dm_timer_disable(timer);
+ return rc;
+ }
+ }
__omap_dm_timer_enable_posted(timer);
omap_dm_timer_disable(timer);
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h
b/arch/arm/plat-omap/include/plat/dmtimer.h
index 05a36e1..c5c890d 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -267,7 +267,6 @@ struct omap_dm_timer {
struct clk *fclk;
void __iomem *io_base;
- void __iomem *sys_stat; /* TISTAT timer status */
void __iomem *irq_stat; /* TISR/IRQSTATUS interrupt status */
void __iomem *irq_ena; /* irq enable */
void __iomem *irq_dis; /* irq disable, only on v2 ip */
@@ -317,8 +316,6 @@ static inline void __omap_dm_timer_init_regs(struct
omap_dm_timer *timer)
tidr = __raw_readl(timer->io_base);
if (!(tidr >> 16)) {
timer->revision = 1;
- timer->sys_stat = timer->io_base +
- OMAP_TIMER_V1_SYS_STAT_OFFSET;
timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
@@ -326,7 +323,6 @@ static inline void __omap_dm_timer_init_regs(struct
omap_dm_timer *timer)
timer->func_base = timer->io_base;
} else {
timer->revision = 2;
- timer->sys_stat = NULL;
timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
@@ -337,25 +333,6 @@ static inline void __omap_dm_timer_init_regs(struct
omap_dm_timer *timer)
}
}
-/* Assumes the source clock has been set by caller */
-static inline void __omap_dm_timer_reset(struct omap_dm_timer *timer,
- int autoidle, int wakeup)
-{
- u32 l;
-
- l = __raw_readl(timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
- l |= 0x02 << 3; /* Set to smart-idle mode */
- l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */
-
- if (autoidle)
- l |= 0x1 << 0;
-
- if (wakeup)
- l |= 1 << 2;
-
- __raw_writel(l, timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
-}
-
/*
* __omap_dm_timer_enable_posted - enables write posted mode
* @timer: pointer to timer instance handle
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
