WB will not be used with compat-mode, i.e. from omapfb. This means we
don't need the current complex dispc_wb_enable function, but can have a
simple register write version of the function.

This patch removes all the extra code from dispc_wb_enable()

Signed-off-by: Tomi Valkeinen <[email protected]>
---
 drivers/video/omap2/dss/dispc.c |   35 ++---------------------------------
 1 file changed, 2 insertions(+), 33 deletions(-)

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 0972bd3..0dca3ff 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -2804,43 +2804,12 @@ void dispc_mgr_disable_sync(enum omap_channel channel)
 
 void dispc_wb_enable(bool enable)
 {
-       enum omap_plane plane = OMAP_DSS_WB;
-       struct completion frame_done_completion;
-       bool is_on;
-       int r;
-       u32 irq;
-
-       is_on = REG_GET(DISPC_OVL_ATTRIBUTES(plane), 0, 0);
-       irq = DISPC_IRQ_FRAMEDONEWB;
-
-       if (!enable && is_on) {
-               init_completion(&frame_done_completion);
-
-               r = omap_dispc_register_isr(dispc_mgr_disable_isr,
-                               &frame_done_completion, irq);
-               if (r)
-                       DSSERR("failed to register FRAMEDONEWB isr\n");
-       }
-
-       REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), enable ? 1 : 0, 0, 0);
-
-       if (!enable && is_on) {
-               if (!wait_for_completion_timeout(&frame_done_completion,
-                                       msecs_to_jiffies(100)))
-                       DSSERR("timeout waiting for FRAMEDONEWB\n");
-
-               r = omap_dispc_unregister_isr(dispc_mgr_disable_isr,
-                               &frame_done_completion, irq);
-               if (r)
-                       DSSERR("failed to unregister FRAMEDONEWB isr\n");
-       }
+       REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(OMAP_DSS_WB), enable ? 1 : 0, 0, 0);
 }
 
 bool dispc_wb_is_enabled(void)
 {
-       enum omap_plane plane = OMAP_DSS_WB;
-
-       return REG_GET(DISPC_OVL_ATTRIBUTES(plane), 0, 0);
+       return REG_GET(DISPC_OVL_ATTRIBUTES(OMAP_DSS_WB), 0, 0);
 }
 
 static void dispc_lcd_enable_signal_polarity(bool act_high)
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to