* Russell King - ARM Linux <[email protected]> [121116 02:07]: > > So, we don't detect whether we're running in secure mode or not; as I've > already stated, we don't have a way to do that. We instead only apply > work-arounds which aren't already enabled prior to the kernel booting. > So, even on a secure mode platform, we will avoid writing the bits if the > work-around has already been applied.
This all assumes that we can read the value of the diagnostic register, and on my 4430 blaze the read returns zero. I have no idea if this is the correct value for the register, or if reads always just returns 0. If we can verify that the read of the diagnostic register returns the correct value, then we don't need to test for the secure mode like you are saying, and can require the bootrom or bootloader set the right bits. Can somebody confirm that reading of the diagnostic register without using SMI is supposed to return the correct value? Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
