On 12/13/2012 08:58 AM, Will Deacon wrote: > Hi Jon, > > On Wed, Dec 12, 2012 at 09:43:04PM +0000, Jon Hunter wrote: >> The Cross Trigger Interface (CTI) helpers in cti.h include definitions >> for the Coresight Lock Access Register (LAR) and Lock Status Register >> (LSR). These registers are already defined in coresight.h and so rather >> than having multiple definitions, just use the definitions from >> coresight.h. >> >> Add the following coresight macros ... >> - coresight_unlock() --> Unlocks coresight module >> - coresight_lock() --> Locks coresight module >> >> Use the above macros for ETB, ETM and CTI. The do-while(0) statement >> has been removed from the macro as it is not a multi-line macro. >> >> Signed-off-by: Jon Hunter <jon-hun...@ti.com> >> --- >> arch/arm/include/asm/cti.h | 16 +++------------- >> arch/arm/include/asm/hardware/coresight.h | 16 ++++++++-------- >> 2 files changed, 11 insertions(+), 21 deletions(-) > > [...] > >> diff --git a/arch/arm/include/asm/hardware/coresight.h >> b/arch/arm/include/asm/hardware/coresight.h >> index 7ecd793..dcd0e66 100644 >> --- a/arch/arm/include/asm/hardware/coresight.h >> +++ b/arch/arm/include/asm/hardware/coresight.h >> @@ -141,17 +141,17 @@ >> #define ETBFF_TRIGEVT BIT(9) >> #define ETBFF_TRIGFL BIT(10) >> >> -#define etb_writel(t, v, x) \ >> - (__raw_writel((v), (t)->etb_regs + (x))) >> +#define etb_writel(t, v, x) (__raw_writel((v), (t)->etb_regs + (x))) >> #define etb_readl(t, x) (__raw_readl((t)->etb_regs + (x))) >> >> -#define etm_lock(t) do { etm_writel((t), 0, CSMR_LOCKACCESS); } while (0) >> -#define etm_unlock(t) \ >> - do { etm_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0) >> +#define etb_lock(t) coresight_lock((t)->etb_regs) >> +#define etb_unlock(t) coresight_unlock((t)->etb_regs) >> +#define etm_lock(t) coresight_lock((t)->etm_regs) >> +#define etm_unlock(t) coresight_unlock((t)->etm_regs) >> >> -#define etb_lock(t) do { etb_writel((t), 0, CSMR_LOCKACCESS); } while (0) >> -#define etb_unlock(t) \ >> - do { etb_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0) >> +#define coresight_lock(base) (__raw_writel(0, base + CSMR_LOCKACCESS)) >> +#define coresight_unlock(base) \ >> + (__raw_writel(UNLOCK_MAGIC, base + CSMR_LOCKACCESS)) >> >> #endif /* __ASM_HARDWARE_CORESIGHT_H */ > > How about we take this opportunity to divorce the more general coresight > bits from the etb specific parts, like you've done for the cti. We could > move the ETB stuff out into asm/etb.h (although it might be nice to keep all > the coresight device headers in one place... answers on a postcard) and just > have the architected coresight functionality in this header.
Yes I have been wondering about that too. Long term it would be good to find a home in the drivers directory for all these coresight devices too. For now, we could extract the etb/etm parts from coresight.h into etb.h and etm.h, respectively. Cheers Jon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html