Hi, On 01/11/2013 12:48 PM, Paul Barker wrote: > Hi, > > I'm currently working on a driver to talk to an analog-to-digital > converter (specifically a Texas Instruments ADS1672) connected to the > McBSP port on a Beagleboard-xM. I'm currently building my driver module > against a 3.2 series kernel with Beagleboard patches and config from > https://github.com/beagleboard/kernel (branch beagleboard-3.2). I'd > like to keep up-to-date with the more recent kernels but my module > won't compile with them. > > When the OMAP McBSP driver stack was merged into a single driver > (commit 45656b4 by Peter Ujfalusi, looks like it went into linux 3.3) > all the EXPORT_SYMBOL macros were removed so I can no longer call the > functions I was using from my external module. Alternatively I could > just be missing something really obvious, let me know if I am!
Since 3.3 there were even more changes in the McBSP driver stack. We (I) did removed lot's of code and it is more focused on it's main functionality (ASoC). What functions you were using from the McBSP driver(s)? > I'm just wondering what the best way forward is from here and I'm sure > I can't be the only person who was using the McBSP driver code in the > kernel to interface with external hardware. The two options I can think > of are either that I move my driver into the kernel source tree itself > or the McBSP driver functions are exported again so that they can be > used by external modules. It's easier to maintain an external module > than a series of patches against the kernel, unless a driver for an > analog-to-digital converter connected to the McBSP port is something > that would actually have a chance of being merged into the mainline > kernel. I could look at making this driver more generic once I have the > current hardware/driver combination working, so that it should work > with most analog-to-digital converters - I haven't found such a driver > in my previous googling. I have taken a brief look at ADS1672 datasheet. At first glance I would think that if you connect the ADC to SPI port of OMAP3 you should be able to read the data out as well. On BeagleBoard-xM you should have access to McSPI3 (CS0, CS1) and McSPI4 (CS0). > If you have any advice on this or a pointer to a better place to ask > this question please let me know. Can you try to see if you can use McSPI for your application? As background: we did not had any other uses of McBSP when I have decided to merge the code and move it out from arch/arm/plat-omap/ This was needed to be done in any ways. The decision back then was that since we don't have users for McBSP other than audio, it is going to be moved under sound/soc/omap/ -- Péter -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
