Hi, This series makes da8xx-fb driver (device found on DaVinci and AM335x) capable of handling runtime timing configuration by adding fb_set_par.
The last change adds actual fb_set_par support. Other preceeding changes makes the way clear for it as well as does certain cleanup's on the way. This has been tested on da850 evm as is. This was also tested on am335x-evm & am335x-evmsk with a series that adds DT support. This is based on v3.8-rc3, this is the only change in this revision. The new version of this series is being posted so that this series can be applied easily (as __dev* are removed, there would be merge conflicts with v2, which was based on -rc2). series Regards Afzal v3: rebased over -rc3, no functional changes v2: disable raster in fb_set_par properly Afzal Mohammed (10): video: da8xx-fb: fb_check_var enhancement video: da8xx-fb: simplify lcd_reset video: da8xx-fb: use modedb helper to update var video: da8xx-fb: remove unneeded "var" initialization video: da8xx-fb: store current display information video: da8xx-fb: store clk rate even if !CPUFREQ video: da8xx-fb: pix clk and clk div handling cleanup video: da8xx-fb: store struct device * video: da8xx-fb: report correct pixclock video: da8xx-fb: fb_set_par support drivers/video/da8xx-fb.c | 185 ++++++++++++++++++++++++++-------------------- 1 file changed, 105 insertions(+), 80 deletions(-) -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
