On Fri, Feb 15, 2013 at 06:33:58PM +0530, a0131647 wrote: > Hi, > On Friday 15 February 2013 05:36 PM, Santosh Shilimkar wrote: > >OMAP UART IP needs manual idle modes based on state of the > >IP. Currently this is handled by the driver with function pointers > >implemented in platform code. > > > >This however breaks in case of device tree because of missing > >idle handling. > > > >The series tries to address the issue > > > >Patches has been tested on OMAP4 and OMAP5 devices where the console > >slugishness was observed without idle mode handling. CPUIDLE and > >suspend tested ok on these devices. > > > >Need help in testing on OMAP2, OMAP3 and AM3XXX devices. > > > Tested this series on omap3630 beagle board for: > 1. Retention in idle and suspend. > 2. Off mode in idle and suspend. > > Tested-by: Sourav Poddar <[email protected]>
try setting autosuspend_delay to -1 -- balbi
signature.asc
Description: Digital signature
