On 02/21/2013 05:11:06 PM, Jason Gunthorpe wrote:
On Thu, Feb 21, 2013 at 05:05:54PM -0500, Nicolas Pitre wrote:
> No it is not. FIT is about bundling a multi-platform kernel with a
> bunch of DTBs together in a single file. I don't think you need
that
> for your embedded system. The "wrong message" here is to distribute
> multiple DTBs around, whether it is with FIT or on a distro install
> media.
Actually we do this on PPC, the boot kernel image runs on three
similar hardware platforms, the image has three DTBs built into it and
the right one is selected at runtime. The kernel boot image does this
(call it a second stage boot loader), not the primary boot
loader.
I strongly disagree with the idea that keeping the DTB seperated from
the kernel is appropriate for all users, or even most users. To me
that only seems appropriate for certain kinds of hardware, eg general
purpose computing devices that are designed to primarily run a Linux
distro.
An embedded SOC eval board, a development platform, an embedded
appliance - these are cases where the kernel and DTB should generally
be more tightly coupled.
This is more or less how PPC has evolved, big commerical PPC systems
like Apple's and IBM's stuff all provide a DTB to the kernel - and
this is actually a bit different then the DT's people are writing for
SOCs, it is firmware generated and includes a full description of all
the probed hardware - including pluggable PCI cards and other
stuff. The hardware is also left configured so there is less for Linux
to do and less that needs to be described in DT.
While embedded focused PPC stuff seems to tend to keep the kernel and
DT together.
At least on the Freescale side of "embedded focused PPC stuff", we have
not kept the kernel and DT together. It's actually U-Boot that the dts
files in the kernel tree are tied to, since they contain assumptions
about how U-Boot lays out the memory map (there are some inherent
limits to "the device tree just describes the hardware", barring some
radical changes in the form device trees take), which things U-Boot
will fill in/modify, and what U-Boot looks for to find out where to
make the modification. Usually U-Boot is the only relevant loader for
a particular board, but not always -- hence "adder875-redboot.dts" and
"adder875-uboot.dts". Even when U-Boot is the only relevant loader,
there are sometimes changes from one version or configuration of U-Boot
to another that cause problems (e.g. the device trees that come in
"32b" and "36b" variants).
-Scott
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
