Add clk_rate parameter to platform data. If supplied, the
NOP phy driver will program the clock to that rate during probe.
Also add 2 flags, needs_vcc and needs_reset.
If the flag is set and the regulator couldn't be found
then the driver will bail out with -EPROBE_DEFER.
Signed-off-by: Roger Quadros <rog...@ti.com>
Acked-by: Felipe Balbi <ba...@ti.com>
---
include/linux/usb/nop-usb-xceiv.h | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/include/linux/usb/nop-usb-xceiv.h
b/include/linux/usb/nop-usb-xceiv.h
index 28884c7..148d351 100644
--- a/include/linux/usb/nop-usb-xceiv.h
+++ b/include/linux/usb/nop-usb-xceiv.h
@@ -5,6 +5,11 @@
struct nop_usb_xceiv_platform_data {
enum usb_phy_type type;
+ unsigned long clk_rate;
+
+ /* if set fails with -EPROBE_DEFER if can't get regulator */
+ unsigned int needs_vcc:1;
+ unsigned int needs_reset:1;
};
#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) &&
defined(MODULE))
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
