On Tuesday 12 March 2013 07:36 PM, Tomi Valkeinen wrote:
On 2013-03-12 15:06, Archit Taneja wrote:
The omapdrm driver requires omapdss panel drivers to expose ops like detect,
set_timings and check_timings. These can be NULL for fixed panel DPI, DBI, DSI
and SDI drivers. At some places, there are no checks to see if the panel driver
has these ops or not, and that leads to a crash.
The following things are done to make fixed panels work:
- The omap_connector's detect function is modified such that it considers panel
types which are generally fixed panels as always connected(provided the panel
driver doesn't have a detect op). Hence, the connector corresponding to these
panels is always in a 'connected' state.
- If a panel driver doesn't have a check_timings op, assume that it supports the
mode passed to omap_connector_mode_valid(the 'mode_valid' drm helper
function)
- The function omap_encoder_update shouldn't really do anything for fixed
resolution panels, make sure that it calls set_timings only if the panel
driver has one.
Signed-off-by: Archit Taneja <arc...@ti.com>
---
Note: In v2, we make sure that the mode passed on to omapdrm matches the timings
of the fixed resolution panel.
drivers/gpu/drm/omapdrm/omap_connector.c | 27 +++++++++++++++++++++++++--
drivers/gpu/drm/omapdrm/omap_encoder.c | 17 +++++++++++++++--
2 files changed, 40 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/omap_connector.c
b/drivers/gpu/drm/omapdrm/omap_connector.c
index c451c41..a72fedd 100644
--- a/drivers/gpu/drm/omapdrm/omap_connector.c
+++ b/drivers/gpu/drm/omapdrm/omap_connector.c
@@ -110,6 +110,11 @@ static enum drm_connector_status omap_connector_detect(
ret = connector_status_connected;
else
ret = connector_status_disconnected;
+ } else if (dssdev->type == OMAP_DISPLAY_TYPE_DPI ||
+ dssdev->type == OMAP_DISPLAY_TYPE_DBI ||
+ dssdev->type == OMAP_DISPLAY_TYPE_SDI ||
+ dssdev->type == OMAP_DISPLAY_TYPE_DSI) {
+ ret = connector_status_connected;
I have to say I don't like this. We shouldn't care about the type here.
I think it's better just to default to connected if there's no detect
function (or unknown? I'm not sure what is the practical difference).
If it works fine without using dssdev->type, we have one less place to
worry when doing dss dev model changes =).
} else {
ret = connector_status_unknown;
}
@@ -189,12 +194,30 @@ static int omap_connector_mode_valid(struct drm_connector
*connector,
struct omap_video_timings timings = {0};
struct drm_device *dev = connector->dev;
struct drm_display_mode *new_mode;
- int ret = MODE_BAD;
+ int r, ret = MODE_BAD;
copy_timings_drm_to_omap(&timings, mode);
mode->vrefresh = drm_mode_vrefresh(mode);
- if (!dssdrv->check_timings(dssdev, &timings)) {
+ /*
+ * if the panel driver doesn't have a check_timings, it's most likely
+ * a fixed resolution panel, check if the timings match with the
+ * panel's timings
+ */
+ if (dssdrv->check_timings) {
+ r = dssdrv->check_timings(dssdev, &timings);
+ } else {
+ struct omap_video_timings t;
+
+ dssdrv->get_timings(dssdev, &t);
+
+ if (memcmp(&timings, &t, sizeof(struct omap_video_timings)))
+ r = -EINVAL;
+ else
+ r = 0;
memcmp on two structs is often not a good idea. There could be padding
bytes there, with uninitialized data. I'm not sure if that's the case
here, though, but it could well change any time (perhaps even depending
on compiler version).
I saw usage of memcmp on structs in the kernel, but then most of them
were in drivers and not core, and could be mistakes :)
adding '__attribute__((packed))' to omap_video_timings might be helpful
I suppose. But I don't know if it's safe to do a memcmp even with a
packed struct.
I'm still pondering whether it'd just be simpler to require all the
dssdrv ops to be filled, probably using a helper macro in the panel
drivers... Did you consider that approach? I'm not saying to go for it,
I'm saying I can't make my mind which would be better =).
I didn't consider it mainly because I thought we were going to get rid
of our private omapdss panel drivers with CDF panels, and efforts in
fixing it wouldn't be much useful. But if there isn't any other good
alternative, then I can try to see what macros look like.
Of course, simpler options for this patch would be to do a manual
compare of the fields instead of a memcmp, or adding default ops in
omap_dss_register_driver.
One thing about common panel driver functions in general is that they
won't use the panel driver's locking. So if a panel driver doesn't
create a get_timings() op assuming that omapdss will make a default func
for it, we would miss out on the panel lock. I don't know if that's
really bad, and doing a memcmp or anything else in omapdrm also doesn't
help with this case.
Archit
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html