At least on pandora, STS_VBUS gets set even when VBUS is driven by twl
itself. Reporting VBUS in this case confuses OMAP musb glue and charger
driver, so check if OTG VBUS charge pump is on before reporting VBUS
event to avoid this problem.

Signed-off-by: Grazvydas Ignotas <nota...@gmail.com>
---
 drivers/usb/phy/phy-twl4030-usb.c |   36 +++++++++++++++++++++++++++++++-----
 1 file changed, 31 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/phy/phy-twl4030-usb.c 
b/drivers/usb/phy/phy-twl4030-usb.c
index 425c18a..87bf11d 100644
--- a/drivers/usb/phy/phy-twl4030-usb.c
+++ b/drivers/usb/phy/phy-twl4030-usb.c
@@ -248,11 +248,31 @@ twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, 
u8 bits)
 
 /*-------------------------------------------------------------------------*/
 
+static bool twl4030_is_driving_vbus(struct twl4030_usb *twl)
+{
+       int ret;
+
+       ret = twl4030_usb_read(twl, PHY_CLK_CTRL_STS);
+       if (ret < 0 || !(ret & PHY_DPLL_CLK))
+               /*
+                * if clocks are off, registers are not updated,
+                * but we can assume we don't drive VBUS in this case
+                */
+               return false;
+
+       ret = twl4030_usb_read(twl, ULPI_OTG_CTRL);
+       if (ret < 0)
+               return false;
+
+       return (ret & (ULPI_OTG_DRVVBUS | ULPI_OTG_CHRGVBUS)) ? true : false;
+}
+
 static enum omap_musb_vbus_id_status
        twl4030_usb_linkstat(struct twl4030_usb *twl)
 {
        int     status;
        enum omap_musb_vbus_id_status linkstat = OMAP_MUSB_UNKNOWN;
+       bool    driving_vbus = false;
 
        twl->vbus_supplied = false;
 
@@ -270,20 +290,26 @@ static enum omap_musb_vbus_id_status
        if (status < 0)
                dev_err(twl->dev, "USB link status err %d\n", status);
        else if (status & (BIT(7) | BIT(2))) {
-               if (status & (BIT(7)))
-                        twl->vbus_supplied = true;
+               if (status & BIT(7)) {
+                       driving_vbus = twl4030_is_driving_vbus(twl);
+                       if (driving_vbus)
+                               status &= ~BIT(7);
+               }
 
                if (status & BIT(2))
                        linkstat = OMAP_MUSB_ID_GROUND;
-               else
+               else if (status & BIT(7)) {
                        linkstat = OMAP_MUSB_VBUS_VALID;
+                       twl->vbus_supplied = true;
+               } else
+                       linkstat = OMAP_MUSB_VBUS_OFF;
        } else {
                if (twl->linkstat != OMAP_MUSB_UNKNOWN)
                        linkstat = OMAP_MUSB_VBUS_OFF;
        }
 
-       dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
-                       status, status, linkstat);
+       dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x; link %d, driving_vbus %d\n",
+               status, linkstat, driving_vbus);
 
        /* REVISIT this assumes host and peripheral controllers
         * are registered, and that both are active...
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to