Santosh Shilimkar <santosh.shilim...@ti.com> writes:
> Move the secondary CPU wakeup prepare code under smp_prepare_cpus().
Why?
> While at
> it drop the un-necessary sev() and barrier which was under prepare code.
>
> Signed-off-by: Santosh Shilimkar <santosh.shilim...@ti.com>
> ---
> arch/arm/mach-omap2/omap-smp.c | 51
> ++++++++++++++++------------------------
> 1 file changed, 20 insertions(+), 31 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
> index 7d29a74..9711ecd 100644
> --- a/arch/arm/mach-omap2/omap-smp.c
> +++ b/arch/arm/mach-omap2/omap-smp.c
> @@ -164,36 +164,6 @@ static int __cpuinit omap4_boot_secondary(unsigned int
> cpu, struct task_struct *
> return 0;
> }
>
> -static void __init wakeup_secondary(void)
> -{
> - void *startup_addr = omap_secondary_startup;
> - void __iomem *base = omap_get_wakeupgen_base();
> -
> - if (cpu_is_omap446x()) {
> - startup_addr = omap_secondary_startup_4460;
> - pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD;
> - }
> -
> - /*
> - * Write the address of secondary startup routine into the
> - * AuxCoreBoot1 where ROM code will jump and start executing
> - * on secondary core once out of WFE
> - * A barrier is added to ensure that write buffer is drained
> - */
> - if (omap_secure_apis_support())
> - omap_auxcoreboot_addr(virt_to_phys(startup_addr));
> - else
> - __raw_writel(virt_to_phys(omap5_secondary_startup),
> - base + OMAP_AUX_CORE_BOOT_1);
> -
> - /*
> - * Send a 'sev' to wake the secondary core from WFE.
> - * Drain the outstanding writes to memory
> - */
> - dsb_sev();
> - mb();
> -}
> -
> /*
> * Initialise the CPU possible map early - this describes the CPUs
> * which may be present or become present in the system.
> @@ -231,6 +201,8 @@ static void __init omap4_smp_init_cpus(void)
>
> static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
> {
> + void *startup_addr = omap_secondary_startup;
> + void __iomem *base = omap_get_wakeupgen_base();
>
> /*
> * Initialise the SCU and wake up the secondary core using
> @@ -238,7 +210,24 @@ static void __init omap4_smp_prepare_cpus(unsigned int
> max_cpus)
> */
> if (scu_base)
> scu_enable(scu_base);
> - wakeup_secondary();
> +
> + if (cpu_is_omap446x()) {
> + startup_addr = omap_secondary_startup_4460;
> + pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD;
> + }
> +
> + /*
> + * Write the address of secondary startup routine into the
> + * AuxCoreBoot1 where ROM code will jump and start executing
> + * on secondary core once out of WFE
> + * A barrier is added to ensure that write buffer is drained
> + */
> + if (omap_secure_apis_support())
> + omap_auxcoreboot_addr(virt_to_phys(startup_addr));
> + else
> + __raw_writel(virt_to_phys(omap5_secondary_startup),
> + base + OMAP_AUX_CORE_BOOT_1);
> +
> }
>
> struct smp_operations omap4_smp_ops __initdata = {
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
