The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
are different.
Abstract away the pinmux and the LED definitions for the two boards.
Signed-off-by: Dan Murphy <dmur...@ti.com>
---
arch/arm/boot/dts/omap4-panda-es.dts | 33 +++++++++++++++++++++++++++++++++
arch/arm/boot/dts/omap4-panda.dts | 22 +++++++++++++++++++++-
2 files changed, 54 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts
b/arch/arm/boot/dts/omap4-panda-es.dts
index 73bc1a6..42fdd86 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -31,3 +31,36 @@
0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */
>;
};
+
+&leds {
+ compatible = "gpio-leds";
+ heartbeat {
+ label = "pandaboard::status1";
+ gpios = <&gpio4 14 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ mmc {
+ label = "pandaboard::status2";
+ gpios = <&gpio1 8 0>;
+ linux,default-trigger = "gpio";
+ };
+};
+
+&led_gpio_pins {
+ pinctrl-single,pins = <
+ 0xb6 0x3 /* gpio_110 OUTPUT | MODE 3 */
+ >;
+};
+
+&omap4_pmx_wkup {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &led_wkgpio_pins
+ >;
+
+ led_wkgpio_pins: pinmux_leds_wkpins {
+ pinctrl-single,pins = <
+ 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/omap4-panda.dts
b/arch/arm/boot/dts/omap4-panda.dts
index 4122efe..465c4b0b8 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -19,7 +19,7 @@
reg = <0x80000000 0x40000000>; /* 1 GB */
};
- leds {
+ leds: leds{
compatible = "gpio-leds";
heartbeat {
label = "pandaboard::status1";
@@ -67,6 +67,7 @@
&mcbsp1_pins
&dss_hdmi_pins
&tpd12s015_pins
+ &led_gpio_pins
>;
twl6040_pins: pinmux_twl6040_pins {
@@ -110,6 +111,25 @@
0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN |
MODE3 */
>;
};
+
+ led_gpio_pins: pinmux_leds_pins {
+ pinctrl-single,pins = <
+ >;
+ };
+};
+
+&omap4_pmx_wkup {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &led_wkgpio_pins
+ >;
+
+ led_wkgpio_pins: pinmux_leds_wkpins {
+ pinctrl-single,pins = <
+ 0x1a 0x3 /* gpio_wk7 OUTPUT | MODE 3 */
+ 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */
+ >;
+ };
};
&i2c1 {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
