On Tue, Apr 30, 2013 at 01:04:20PM +0200, Arnd Bergmann wrote: > On Tuesday 30 April 2013, Russell King - ARM Linux wrote: > > Latest nightly build of 3.9+my for-next+arm-soc's for-next results in a > > great load of new warnings and errors. arch/arm/common/mcpm_head.S, > > arch/arm/common/mcpm_platsmp.c, arch/arm/common/vlock.S are the biggest > > source of errors.
[...] > >arch/arm/common/mcpm_head.S:39: Error: selected processor does not support > >ARM mode `ubfx r9,r0,#0,#8' > >arch/arm/common/mcpm_head.S:40: Error: selected processor does not support > >ARM mode `ubfx r10,r0,#8,#8' > >arch/arm/common/mcpm_head.S:100: Error: selected processor does not support > >ARM mode `dmb' > >arch/arm/common/mcpm_head.S:115: Error: selected processor does not support > >ARM mode `dmb' > >arch/arm/common/mcpm_head.S:127: Error: selected processor does not support > >ARM mode `dmb' > >arch/arm/common/mcpm_head.S:131: Error: selected processor does not support > >ARM mode `dmb' > >arch/arm/common/mcpm_head.S:138: Error: selected processor does not support > >ARM mode `dsb' > >arch/arm/common/mcpm_head.S:152: Error: selected processor does not support > >ARM mode `dmb' > >arch/arm/common/mcpm_head.S:161: Error: selected processor does not support > >ARM mode `dmb' > >arch/arm/common/mcpm_head.S:175: Error: selected processor does not support > >ARM mode `dmb' > >arch/arm/common/vlock.S:62: Error: selected processor does not support ARM > >mode `dmb' > >arch/arm/common/vlock.S:72: Error: selected processor does not support ARM > >mode `dmb' > >arch/arm/common/vlock.S:72: Error: selected processor does not support ARM > >mode `dsb' > >arch/arm/common/vlock.S:89: Error: selected processor does not support ARM > >mode `dmb' > >arch/arm/common/vlock.S:95: Error: selected processor does not support ARM > >mode `dmb' > >arch/arm/common/vlock.S:95: Error: selected processor does not support ARM > >mode `dsb' > >arch/arm/common/vlock.S:102: Error: selected processor does not support ARM > >mode `dmb' > >arch/arm/common/vlock.S:105: Error: selected processor does not support ARM > >mode `dsb' > > Right, the problem here is that the code was never tested with an ARMv6+ARMv7 > config. > We can either fix it up by adding > > .arch armv7-a > > in the assembly files, or by doing the same in the Makefile: > > AFLAGS_vlock.S += -march=armv7-a > AFLAGS_mcpm_head.S += -march=armv7-a Hmmm, this code was tested with ARCH_MULTIPLATFORM, but it looks like no v6 boards were configured in when testing that... Assuming people are OK with the Makefile route, here's a patch for that, build-tested with a v6+v7 ARCH_MULTIPLATFORM config. Cheers ---Dave >From 193f254689beaa1612d29bcc5ba004a933b37d95 Mon Sep 17 00:00:00 2001 From: Dave Martin <dave.mar...@linaro.org> Date: Tue, 30 Apr 2013 12:25:04 +0100 Subject: [PATCH 1/3] ARM: mcpm: Add explicit AFLAGS to support v6/v7 multiplatform kernels The full mcpm layer is not likely to be relevant to v6 based platforms, so a multiplatform kernel won't use that code if booted on v6 hardware. This patch modifies the AFLAGS for affected mcpm .S files to specify armv7-a explicitly for that code. Signed-off-by: Dave Martin <dave.mar...@linaro.org> --- arch/arm/common/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 546a932..d65a0a8 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -12,6 +12,8 @@ obj-$(CONFIG_SHARP_SCOOP) += scoop.o obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o +AFLAGS_mcpm_head.o := -march=armv7-a +AFLAGS_vlock.o := -march=armv7-a CFLAGS_REMOVE_mcpm_entry.o = -pg obj-$(CONFIG_FIQ_GLUE) += fiq_glue.o fiq_glue_setup.o obj-$(CONFIG_FIQ_DEBUGGER) += fiq_debugger.o -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html