Adding phy-mode support to cpsw driver and updating the cpsw binding
documentation.
Signed-off-by: Mugunthan V N <mugunthan...@ti.com>
---
Documentation/devicetree/bindings/net/cpsw.txt | 6 ++++++
drivers/net/ethernet/ti/cpsw.c | 2 ++
2 files changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt
b/Documentation/devicetree/bindings/net/cpsw.txt
index 4f2ca6b..05d660e 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -28,6 +28,8 @@ Optional properties:
Slave Properties:
Required properties:
- phy_id : Specifies slave phy id
+- phy-mode : The interface between the SoC and the PHY (a string
+ that of_get_phy_mode() can understand)
- mac-address : Specifies slave MAC address
Optional properties:
@@ -58,11 +60,13 @@ Examples:
cpts_clock_shift = <29>;
cpsw_emac0: slave@0 {
phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rgmii-txid";
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
};
cpsw_emac1: slave@1 {
phy_id = <&davinci_mdio>, <1>;
+ phy-mode = "rgmii-txid";
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
};
@@ -84,11 +88,13 @@ Examples:
cpts_clock_shift = <29>;
cpsw_emac0: slave@0 {
phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rgmii-txid";
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
};
cpsw_emac1: slave@1 {
phy_id = <&davinci_mdio>, <1>;
+ phy-mode = "rgmii-txid";
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
};
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 89a4c40..a45f64e 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -1554,6 +1554,8 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
if (mac_addr)
memcpy(slave_data->mac_addr, mac_addr, ETH_ALEN);
+ slave_data->phy_if = of_get_phy_mode(slave_node);
+
if (data->dual_emac) {
if (of_property_read_u32(slave_node,
"dual_emac_res_vlan",
&prop)) {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
