Hello Javier,
On 06/11/2013 05:29 PM, Javier Martinez Canillas wrote:
On 06/11/2013 04:48 PM, Florian Vaussard wrote:
Use the MTD constants for NAND and OneNAND nodes used in OMAP3
DTS.
Signed-off-by: Florian Vaussard <florian.vauss...@epfl.ch>
---
arch/arm/boot/dts/omap3-devkit8000.dts | 10 +++++-----
arch/arm/boot/dts/omap3-igep0020.dts | 10 +++++-----
arch/arm/boot/dts/omap3-igep0030.dts | 10 +++++-----
arch/arm/boot/dts/omap3430-sdp.dts | 28 ++++++++++++++--------------
4 files changed, 29 insertions(+), 29 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts
b/arch/arm/boot/dts/omap3-devkit8000.dts
index 5be71b1..08699cb 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -143,27 +143,27 @@
x-loader@0 {
label = "X-Loader";
- reg = <0 0x80000>;
+ reg = <(0 * SZ_128K) (4 * SZ_128K)>;
};
bootloaders@80000 {
label = "U-Boot";
- reg = <0x80000 0x1e0000>;
+ reg = <(4 * SZ_128K) (15 * SZ_128K)>;
};
bootloaders_env@260000 {
label = "U-Boot Env";
- reg = <0x260000 0x20000>;
+ reg = <(19 * SZ_128K) (1 * SZ_128K)>;
};
kernel@280000 {
label = "Kernel";
- reg = <0x280000 0x400000>;
+ reg = <(20 * SZ_128K) (32 * SZ_128K)>;
};
filesystem@680000 {
label = "File System";
- reg = <0x680000 0xf980000>;
+ reg = <(52 * SZ_128K) MTDPART_SIZ_FULL>;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts
b/arch/arm/boot/dts/omap3-igep0020.dts
index e8c4828..3476b3c 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -97,23 +97,23 @@
partition@0 {
label = "SPL";
- reg = <0 0x100000>;
+ reg = <(0 * SZ_256K) (4 * SZ_256K)>;
};
partition@0x80000 {
label = "U-Boot";
- reg = <0x100000 0x180000>;
+ reg = <(4 * SZ_256K) (6 * SZ_256K)>;
};
partition@0x1c0000 {
label = "Environment";
- reg = <0x280000 0x100000>;
+ reg = <(10 * SZ_256K) (4 * SZ_256K)>;
};
partition@0x280000 {
label = "Kernel";
- reg = <0x380000 0x300000>;
+ reg = <(14 * SZ_256K) (12 * SZ_256K)>;
};
partition@0x780000 {
label = "Filesystem";
- reg = <0x680000 0x1f980000>;
+ reg = <(26 * SZ_256K) MTDPART_SIZ_FULL>;
};
};
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts
b/arch/arm/boot/dts/omap3-igep0030.dts
index 644d053..e4f078c 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -72,23 +72,23 @@
partition@0 {
label = "SPL";
- reg = <0 0x100000>;
+ reg = <(0 * SZ_256K) (4 * SZ_256K)>;
};
partition@0x80000 {
label = "U-Boot";
- reg = <0x100000 0x180000>;
+ reg = <(4 * SZ_256K) (6 * SZ_256K)>;
};
partition@0x1c0000 {
label = "Environment";
- reg = <0x280000 0x100000>;
+ reg = <(10 * SZ_256K) (4 * SZ_256K)>;
};
partition@0x280000 {
label = "Kernel";
- reg = <0x380000 0x300000>;
+ reg = <(14 * SZ_256K) (12 * SZ_256K)>;
};
partition@0x780000 {
label = "Filesystem";
- reg = <0x680000 0x1f980000>;
+ reg = <(26 * SZ_256K) MTDPART_SIZ_FULL>;
};
};
};
Hi Florian,
I don't have access to my IGEP board so I can test it right now but the patch
looks good to me.
In fact I wanted to use MTDPART_SIZ_FULL when added the NAND nodes since not all
IGEP boards have 512MB flash but I didn't know that a value of 0 meant that.
I had the same problem, and found that 0 was correctly parsed and later
expanded to
the correct value when probing the NAND.
So thanks a lot for doing this!
Acked-by: Javier Martinez Canillas <javier.marti...@collabora.co.uk>
Thank you.
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
