On Mon, Jun 24, 2013 at 05:35:18PM +0200, Javier Martinez Canillas wrote:
> Ok, so something like the following patch should do it (tested on an
> OMAP3 board):
>
> From b9e262c688fb7f3ad733f140b55dddbc8e4716e6 Mon Sep 17 00:00:00 2001
> From: Javier Martinez Canillas <javier.marti...@collabora.co.uk>
> Date: Mon, 24 Jun 2013 17:13:23 +0200
> Subject: [PATCH 1/1] gpio/omap: don't use linear domain mapping for OMAP1
>
> commit ede4d7a5 ("gpio/omap: convert gpio irq domain to linear mapping")
> converted the OMAP GPIO driver to use a linear mapping for the GPIO IRQ
> domain instead of using a legacy mapping. Not using a legacy mapping has
> a number of benefits but it requires the platform to support SPARSE_IRQ
> which currently is not supported on OMAP1.
>
> So this change caused a regression on OMAP1 platforms [1].
>
> Since this issue is not present on all OMAP2+ platforms, there is no need to
> revert the driver to use legacy domain mapping for all the platforms.
>
> [1]: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg89005.html
>
> Signed-off-by: Javier Martinez Canillas <javier.marti...@collabora.co.uk>
I tested this on OMAP1 / 770, and it's fine.
Tested-by: Aaro Koskinen <aaro.koski...@iki.fi>
Thanks,
A.
> ---
> drivers/gpio/gpio-omap.c | 22 +++++++++++++++++++++-
> 1 files changed, 21 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
> index d3f7d2d..4a43036 100644
> --- a/drivers/gpio/gpio-omap.c
> +++ b/drivers/gpio/gpio-omap.c
> @@ -1094,6 +1094,9 @@ static int omap_gpio_probe(struct platform_device *pdev)
> const struct omap_gpio_platform_data *pdata;
> struct resource *res;
> struct gpio_bank *bank;
> +#ifdef CONFIG_ARCH_OMAP1
> + int irq_base;
> +#endif
>
> match = of_match_device(of_match_ptr(omap_gpio_match), dev);
>
> @@ -1135,11 +1138,28 @@ static int omap_gpio_probe(struct platform_device
> *pdev)
> pdata->get_context_loss_count;
> }
>
> +#ifdef CONFIG_ARCH_OMAP1
> + /*
> + * REVISIT: Once we have OMAP1 supporting SPARSE_IRQ, we can drop
> + * irq_alloc_descs() and irq_domain_add_legacy() and just use a
> + * linear IRQ domain mapping for all OMAP platforms.
> + */
> + irq_base = irq_alloc_descs(-1, 0, bank->width, 0);
> + if (irq_base < 0) {
> + dev_err(dev, "Couldn't allocate IRQ numbers\n");
> + return -ENODEV;
> + }
>
> + bank->domain = irq_domain_add_legacy(node, bank->width, irq_base,
> + 0, &irq_domain_simple_ops, NULL);
> +#else
> bank->domain = irq_domain_add_linear(node, bank->width,
> &irq_domain_simple_ops, NULL);
> - if (!bank->domain)
> +#endif
> + if (!bank->domain) {
> + dev_err(dev, "Couldn't register an IRQ domain\n");
> return -ENODEV;
> + }
>
> if (bank->regs->set_dataout && bank->regs->clr_dataout)
> bank->set_dataout = _set_gpio_dataout_reg;
> --
> 1.7.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
