(fixed the ARM mailing list address)

On Tue, 2013-06-25 at 11:35 +0300, Luciano Coelho wrote:
> Add device tree bindings documentation for the TI WiLink modules.
> Currently only the WLAN part of the WiLink6, WiLink7 and WiLink8
> modules is supported.
> 
> Signed-off-by: Luciano Coelho <coe...@ti.com>
> ---
> 
> I created a new directory under net to contain wireless bindings 
> documentation.
> 
> The actual implementation in the driver will follow separately.
> 
>  .../devicetree/bindings/net/wireless/ti-wilink.txt |   46 
> ++++++++++++++++++++
>  1 file changed, 46 insertions(+)
>  create mode 100644 
> Documentation/devicetree/bindings/net/wireless/ti-wilink.txt
> 
> diff --git a/Documentation/devicetree/bindings/net/wireless/ti-wilink.txt 
> b/Documentation/devicetree/bindings/net/wireless/ti-wilink.txt
> new file mode 100644
> index 0000000..d8e8bfbb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/wireless/ti-wilink.txt
> @@ -0,0 +1,46 @@
> +TI WiLink Wireless Modules Device Tree Bindings
> +===============================================
> +
> +The WiLink modules provide wireless connectivity, such as WLAN,
> +Bluetooth, FM and NFC.
> +
> +There are several different modules available, which can be grouped by
> +their generation: WiLink6, WiLink7 and WiLink8.  WiLink4 is not
> +currently supported with device tree.
> +
> +Currently, only the WLAN portion of the modules is supported with
> +device tree.
> +
> +Required properties:
> +--------------------
> +
> +- compatible: should be "ti,wilink6", "ti,wilink7" or "ti,wilink8"
> +- interrupt-parent: the interrupt controller
> +- interrupts: out-of-band WLAN interrupt
> +     See the interrupt controller's bindings documentation for
> +     detailed definition.
> +
> +Optional properties:
> +--------------------
> +
> +- refclock: the internal WLAN reference clock frequency (required for
> +  WiLink6 and WiLink7; not used for WiLink8).  Must be one of the
> +  following:
> +     0 = 19.2 MHz
> +     1 = 26.0 MHz
> +     2 = 38.4 MHz
> +     3 = 52.0 MHz
> +     4 = 38.4 MHz, XTAL
> +     5 = 26.0 MHz, XTAL
> +
> +- tcxoclock: the internal WLAN TCXO clock frequency (required for
> +  WiLink7 not used for WiLink6 and WiLink8).  Must be one of the
> +  following:
> +     0 = 19.200 MHz
> +     1 = 26.000 MHz
> +     2 = 38.400 MHz
> +     3 = 52.000 MHz
> +     4 = 16.368 MHz
> +     5 = 32.736 MHz
> +     6 = 16.800 MHz
> +     7 = 33.600 MHz

If this is okay for everyone, can I push this via my tree (which goes to
linux-wireless->net->linus)? I think it makes more sense to send the
documentation together with the patch that actually implements the DT
node parsing in the driver.

--
Luca.

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to