Hi,
On Wednesday 03 July 2013 10:47 PM, Florian Fainelli wrote:
Hello,
2013/7/3 Sourav Poddar<sourav.pod...@ti.com>:
From: Mona Anonuevo<manonu...@micron.com>
This patch adds support for a generic spinand framework(spinand_mtd.c).
This frameowrk can be used for other spi based flash devices. The idea
is to have a common model under drivers/mtd, as also present for other non spi
devices(there is a generic framework and device part simply attaches itself to
it.)
Resending my comments since your previous submissino
Signed-off-by: Mona Anonuevo<manonu...@micron.com>
Signed-off-by: Tuan Nguyen<tqngu...@micron.com>
Signed-off-by: Sourav Poddar<sourav.pod...@ti.com>
----
[snip]
+if MTD_SPINAND
+
+config MTD_SPINAND_ONDIEECC
+ bool "Use SPINAND internal ECC"
+ help
+ Internel ECC
+
+config MTD_SPINAND_SWECC
+ bool "Use software ECC"
+ depends on MTD_NAND
+ help
+ software ECC
Can this somehow be made a runtime thing?
Ahh..I think we might opt for a device tree entry and based on that
check for ECC.
[snip]
+ if (count< oob_num&& ops->oobbuf&& chip->oobbuf) {
+ int size;
+ int offset, len, temp;
+
+ /* repack spare to oob */
+ memset(chip->oobbuf, 0, info->ecclayout->oobavail);
+
+ temp = 0;
+ offset = info->ecclayout->oobfree[0].offset;
+ len = info->ecclayout->oobfree[0].length;
+ memcpy(chip->oobbuf + temp,
+ chip->buf + info->page_main_size + offset, len);
Sounds like a for look might be useful here
I dont think so, there is a while loop above under which it happens.
We are increasing count at the bottom of the while loop. So, I think
this should work fine.
+
+ temp += len;
+ offset = info->ecclayout->oobfree[1].offset;
+ len = info->ecclayout->oobfree[1].length;
+ memcpy(chip->oobbuf + temp,
+ chip->buf + info->page_main_size + offset, len);
+
+ temp += len;
+ offset = info->ecclayout->oobfree[2].offset;
+ len = info->ecclayout->oobfree[2].length;
+ memcpy(chip->oobbuf + temp,
+ chip->buf + info->page_main_size + offset, len);
+
+ temp += len;
+ offset = info->ecclayout->oobfree[3].offset;
+ len = info->ecclayout->oobfree[3].length;
+ memcpy(chip->oobbuf + temp,
+ chip->buf + info->page_main_size + offset, len);
+
[snip]
+ /* repack oob to spare */
+ temp = 0;
+ offset = info->ecclayout->oobfree[0].offset;
+ len = info->ecclayout->oobfree[0].length;
+ memcpy(chip->buf + info->page_main_size + offset,
+ chip->oobbuf + temp, len);
And here too.
Same as above.
+
+ temp += len;
+ offset = info->ecclayout->oobfree[1].offset;
+ len = info->ecclayout->oobfree[1].length;
+ memcpy(chip->buf + info->page_main_size + offset,
+ chip->oobbuf + temp, len);
+
+ temp += len;
+ offset = info->ecclayout->oobfree[2].offset;
+ len = info->ecclayout->oobfree[2].length;
+ memcpy(chip->buf + info->page_main_size + offset,
+ chip->oobbuf + temp, len);
+
+ temp += len;
+ offset = info->ecclayout->oobfree[3].offset;
+ len = info->ecclayout->oobfree[3].length;
+ memcpy(chip->buf + info->page_main_size + offset,
+ chip->oobbuf + temp, len);
+ }
[snip]
+++ b/include/linux/mtd/spinand.h
@@ -0,0 +1,155 @@
+/*
+ * linux/include/linux/mtd/spinand.h
+ * Copyright (c) 2009-2010 Micron Technology, Inc.
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+/bin/bash: 4: command not found
+ *
+ * based on nand.h
+ */
+#ifndef __LINUX_MTD_SPI_NAND_H
+#define __LINUX_MTD_SPI_NAND_H
+
+#include<linux/wait.h>
+#include<linux/spinlock.h>
+#include<linux/mtd/mtd.h>
+
+/* cmd */
+#define CMD_READ 0x13
+#define CMD_READ_RDM 0x03
+#define CMD_PROG_PAGE_CLRCACHE 0x02
+#define CMD_PROG_PAGE 0x84
+#define CMD_PROG_PAGE_EXC 0x10
+#define CMD_ERASE_BLK 0xd8
+#define CMD_WR_ENABLE 0x06
+#define CMD_WR_DISABLE 0x04
+#define CMD_READ_ID 0x9f
+#define CMD_RESET 0xff
+#define CMD_READ_REG 0x0f
+#define CMD_WRITE_REG 0x1f
Can we somehow namespace these defines so they are not so generic?
Something like SPI_NAND_CMD_READ would be just fine I guess.
I think SPI_CMD_READ will make more sense then, since these
commands will be applicable for other type of flash devices also.
+
+/* feature/ status reg */
+#define REG_BLOCK_LOCK 0xa0
+#define REG_OTP 0xb0
+#define REG_STATUS 0xc0/* timing */
+
+/* status */
+#define STATUS_OIP_MASK 0x01
+#define STATUS_READY (0<< 0)
+#define STATUS_BUSY (1<< 0)
+
+#define STATUS_E_FAIL_MASK 0x04
+#define STATUS_E_FAIL (1<< 2)
+
+#define STATUS_P_FAIL_MASK 0x08
+#define STATUS_P_FAIL (1<< 3)
+
+#define STATUS_ECC_MASK 0x30
+#define STATUS_ECC_1BIT_CORRECTED (1<< 4)
+#define STATUS_ECC_ERROR (2<< 4)
+#define STATUS_ECC_RESERVED (3<< 4)
+
+
+/*ECC enable defines*/
+#define OTP_ECC_MASK 0x10
+#define OTP_ECC_OFF 0
+#define OTP_ECC_ON 1
+
+#define ECC_DISABLED
+#define ECC_IN_NAND
+#define ECC_SOFT
+
+/* block lock */
+#define BL_ALL_LOCKED 0x38
+#define BL_1_2_LOCKED 0x30
+#define BL_1_4_LOCKED 0x28
+#define BL_1_8_LOCKED 0x20
+#define BL_1_16_LOCKED 0x18
+#define BL_1_32_LOCKED 0x10
+#define BL_1_64_LOCKED 0x08
+#define BL_ALL_UNLOCKED 0
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
