Add API to power on/off USB PHY for AM335X. This API will be called
from phy-amxxxx-usb driver.
Signed-off-by: George Cherian <george.cher...@ti.com>
---
drivers/usb/phy/phy-omap-control.c | 32 ++++++++++++++++++++++++++++++++
include/linux/usb/omap_control_usb.h | 11 +++++++++++
2 files changed, 43 insertions(+)
diff --git a/drivers/usb/phy/phy-omap-control.c
b/drivers/usb/phy/phy-omap-control.c
index 1419ced..0c1822d 100644
--- a/drivers/usb/phy/phy-omap-control.c
+++ b/drivers/usb/phy/phy-omap-control.c
@@ -46,6 +46,38 @@ struct device *omap_get_control_dev(void)
EXPORT_SYMBOL_GPL(omap_get_control_dev);
/**
+ * omap_control_am335x_phy_power - power on/off the serializer using control
+ * module
+ * @dev: the control module device
+ * @on: 0 to off and 1 to on based on powering on or off the PHY
+ * @id: phy id 0 or 1 for phy instance 0 and 1 repectively
+ *
+ * AMXXXX PHY driver should call this API to power on or off the PHY.
+ */
+void omap_control_am335x_phy_power(struct device *dev, bool on, u8 id)
+{
+ u32 val;
+ struct omap_control_usb *control_usb = dev_get_drvdata(dev);
+
+ if (control_usb->type != OMAP_CTRL_DEV_TYPE3)
+ return;
+
+ val = readl(control_usb->dev_conf + (id * 2));
+
+ if (on) {
+ val &= ~(AM335X_USBPHY_CM_PWRDN | AM335X_USBPHY_OTG_PWRDN);
+ val |= AM335X_USBPHY_OTGVDET_EN |
+ AM335X_USBPHY_OTGSESSEND_EN;
+ } else
+ val |= AM335X_USBPHY_CM_PWRDN | AM335X_USBPHY_OTG_PWRDN;
+
+
+ writel(val, (control_usb->dev_conf + (id * 2)));
+}
+EXPORT_SYMBOL_GPL(omap_control_am335x_phy_power);
+
+
+/**
* omap_control_usb3_phy_power - power on/off the serializer using control
* module
* @dev: the control module device
diff --git a/include/linux/usb/omap_control_usb.h
b/include/linux/usb/omap_control_usb.h
index 27b5b8c..11d7a34 100644
--- a/include/linux/usb/omap_control_usb.h
+++ b/include/linux/usb/omap_control_usb.h
@@ -45,6 +45,7 @@ enum omap_control_usb_mode {
/* To differentiate ctrl module IP having either mailbox or USB3 PHY power */
#define OMAP_CTRL_DEV_TYPE1 0x1
#define OMAP_CTRL_DEV_TYPE2 0x2
+#define OMAP_CTRL_DEV_TYPE3 0x3
#define OMAP_CTRL_DEV_PHY_PD BIT(0)
@@ -63,10 +64,20 @@ enum omap_control_usb_mode {
#define OMAP_CTRL_USB3_PHY_TX_RX_POWERON 0x3
#define OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF 0x0
+#define AM335X_USBPHY_CM_PWRDN (1 << 0)
+#define AM335X_USBPHY_OTG_PWRDN (1 << 1)
+#define AM335X_USBPHY_OTGVDET_EN (1 << 19)
+#define AM335X_USBPHY_OTGSESSEND_EN (1 << 20)
+#define AM335X_USB0_WKUP_CTRL_ENABLE (1 << 0)
+#define AM335X_USB1_WKUP_CTRL_ENABLE (1 << 8)
+
+
+
#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB)
extern struct device *omap_get_control_dev(void);
extern void omap_control_usb_phy_power(struct device *dev, int on);
extern void omap_control_usb3_phy_power(struct device *dev, bool on);
+extern void omap_control_am335x_phy_power(struct device *dev, bool on, u8 id);
extern void omap_control_usb_set_mode(struct device *dev,
enum omap_control_usb_mode mode);
#else
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
