In order for controllers to get PHY in case of non dt boot, the phy binding information (phy label) should be added in the platform data of the controller.
Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com> Acked-by: Felipe Balbi <ba...@ti.com> Tested-by: Tomi Valkeinen <tomi.valkei...@ti.com> --- arch/arm/mach-omap2/usb-musb.c | 3 +++ include/linux/usb/musb.h | 3 +++ 2 files changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 8c4de27..20b42de 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -85,6 +85,9 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) musb_plat.mode = board_data->mode; musb_plat.extvbus = board_data->extvbus; + if (cpu_is_omap34xx()) + musb_plat.phy_name = "twl4030"; + if (soc_is_am35xx()) { oh_name = "am35x_otg_hs"; name = "musb-am35x"; diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index 053c268..c05d46d 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -104,6 +104,9 @@ struct musb_hdrc_platform_data { /* for clk_get() */ const char *clock; + /* phy device label */ + const char *phy_name; + /* (HOST or OTG) switch VBUS on/off */ int (*set_vbus)(struct device *dev, int is_on); -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html