On 07/23/2013 04:06 AM, Tomi Valkeinen wrote:
This is no longer needed as omap4 is now booted using device tree.Signed-off-by: Tomi Valkeinen <tomi.valkei...@ti.com> --- arch/arm/mach-omap2/dss-common.c | 47 ---------------------------------------- arch/arm/mach-omap2/dss-common.h | 2 -- 2 files changed, 49 deletions(-) diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index 043e570..00c0492 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -80,24 +80,6 @@ static struct omap_dss_board_info omap4_panda_dss_data = { .default_device = &omap4_panda_dvi_device, }; -void __init omap4_panda_display_init(void) -{ - omap_display_init(&omap4_panda_dss_data); - - /* - * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and - * later have external pull up on the HDMI I2C lines - */ - if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) - omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); - else - omap_hdmi_init(0); - - omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); -} - void __init omap4_panda_display_init_of(void) { omap_display_init(&omap4_panda_dss_data); @@ -204,35 +186,6 @@ static struct omap_dss_board_info sdp4430_dss_data = { * used by picodlp on the 4430sdp platform. Keep this gpio disabled as LCD2 is * selected by default */ -void __init omap_4430sdp_display_init(void) -{ - int r; - - r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, - "display_sel"); - if (r) - pr_err("%s: Could not get display_sel GPIO\n", __func__); - - r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, - "DLP POWER ON"); - if (r) - pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__); - - omap_display_init(&sdp4430_dss_data); - /* - * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and - * later have external pull up on the HDMI I2C lines - */ - if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) - omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); - else - omap_hdmi_init(0); - - omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); -} - void __init omap_4430sdp_display_init_of(void) { int r; diff --git a/arch/arm/mach-omap2/dss-common.h b/arch/arm/mach-omap2/dss-common.h index 915f6ff..c28fe3c 100644 --- a/arch/arm/mach-omap2/dss-common.h +++ b/arch/arm/mach-omap2/dss-common.h @@ -6,9 +6,7 @@ * This file will be removed when DSS supports DT. */ -void __init omap4_panda_display_init(void); void __init omap4_panda_display_init_of(void); -void __init omap_4430sdp_display_init(void); void __init omap_4430sdp_display_init_of(void); #endif
Am I missing some series which introduces dts entries for the pinctrl and gpios for omap4 support?
-- Regards, Nishanth Menon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
