On Thu, Aug 01, 2013 at 02:17:13PM -0400, Santosh Shilimkar wrote: > From: Vaibhav Bedia <vaibhav.be...@ti.com> > > The generic code is well equipped to differentiate between > SMP and UP configurations.However, there are some devices which > use Cortex-A9 MP core IP with 1 CPU as configuration. To let > these SOCs to co-exist in a CONFIG_SMP=y build by leveraging > the SMP_ON_UP support, we need to additionally check the > number the cores in Cortex-A9 MPCore configuration. Without > such a check in place, the startup code tries to execute > ALT_SMP() set of instructions which lead to CPU faults. > > The issue was spotted on TI's Aegis device and this patch > makes now the device work with omap2plus_defconfig which > enables SMP by default. The change is kept limited to only > Cortex-A9 MPCore detection code.
Is there a specific reason why this can't happen for other processors such as A5/7/15? Cheers ---Dave > > Cc: Will Deacon <will.dea...@arm.com> > Cc: Russell King <li...@arm.linux.org.uk> > > Acked-by: Sricharan R <r.sricha...@ti.com> > Signed-off-by: Vaibhav Bedia <vaibhav.be...@ti.com> > Signed-off-by: Santosh Shilimkar <santosh.shilim...@ti.com> > --- > arch/arm/kernel/head.S | 18 +++++++++++++++++- > 1 file changed, 17 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S > index 9cf6063..4924b11 100644 > --- a/arch/arm/kernel/head.S > +++ b/arch/arm/kernel/head.S > @@ -486,7 +486,23 @@ __fixup_smp: > mrc p15, 0, r0, c0, c0, 5 @ read MPIDR > and r0, r0, #0xc0000000 @ multiprocessing extensions and > teq r0, #0x80000000 @ not part of a uniprocessor system? > - moveq pc, lr @ yes, assume SMP > + bne __fixup_smp_on_up @ no, assume UP > + > + @ Core indicates it is SMP. Check for Aegis SOC where a single > + @ Cortex-A9 CPU is present but SMP operations fault. > + mov r4, #0x41000000 > + orr r4, r4, #0x0000c000 > + orr r4, r4, #0x00000090 > + teq r3, r4 @ Check for ARM Cortex-A9 > + movne pc, lr @ Not ARM Cortex-A9, > + > + mrc p15, 4, r0, c15, c0 @ get SCU base address > + teq r0, #0x0 @ '0' on actual UP A9 hardware > + beq __fixup_smp_on_up @ So its an A9 UP > + ldr r0, [r0, #4] @ read SCU Config > + and r0, r0, #0x3 @ number of CPUs > + teq r0, #0x0 @ is 1? > + movne pc, lr > > __fixup_smp_on_up: > adr r0, 1f > -- > 1.7.9.5 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-ker...@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
