Add a DT node for VPE in dra7.dtsi. This is experimental because we might need
to split the VPE address space a bit more, and also because the IRQ line
described is accessible the IRQ crossbar driver is added for DRA7XX.
Cc: Rajendra Nayak <rna...@ti.com>
Cc: Sricharan R <r.sricha...@ti.com>
Signed-off-by: Archit Taneja <arc...@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index ce9a0f0..7c1cbfe 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -484,6 +484,17 @@
dmas = <&sdma 70>, <&sdma 71>;
dma-names = "tx0", "rx0";
};
+
+ vpe {
+ compatible = "ti,vpe";
+ ti,hwmods = "vpe";
+ reg = <0x489d0000 0xd000>, <0x489dd000 0x400>;
+ reg-names = "vpe", "vpdma";
+ interrupts = <0 158 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
};
clocks {
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
