Hello. On 09-09-2013 10:42, Mugunthan V N wrote:
Add DT entries for the phy mode selection in AM33xx SoC using cpsw-phy-sel driver.
Signed-off-by: Mugunthan V N <mugunthan...@ti.com> --- arch/arm/boot/dts/am33xx.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index f9c5da9..4359672 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -594,6 +594,12 @@ /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; }; + + phy_sel: cpsw_phy_sel@44e10650 {
Dashes are preferred to uderscores in the device tree names.
I tried with dashes but i get the below error.
$ make CROSS_COMPILE=arm-linux-gnueabihf- ARCH=arm dtbs DTC arch/arm/boot/dts/am335x-evm.dtb Error: arch/arm/boot/dts/am33xx.dtsi:598.11-12 syntax error FATAL ERROR: Unable to parse input tree make[1]: *** [arch/arm/boot/dts/am335x-evm.dtb] Error 1 make: *** [dtbs] Error 2
Hm, perhaps the dashes can't be used in the labels but I was talking of the names. Dashes in the node names should be definitely valid.
Regards Mugunthan V N
WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
