On Sunday 08 September 2013 10:50:39 Pali Rohár wrote:
> This patch will register bq24150a charger in RX-51 board data.
> Patch also adding platform function between isp1704 and
> bq2415x drivers for detecting charger type.
>
> So finally charging battery on Nokia N900 (RX-51) working
> automatically without any proprietary Nokia bits in userspace.
>
> Signed-off-by: Pali Rohár <pali.ro...@gmail.com>
> ---
> arch/arm/mach-omap2/board-rx51-peripherals.c | 56
> +++++++++++++++++++++++++- 1 file changed, 55 insertions(+),
> 1 deletion(-)
>
> diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c
> b/arch/arm/mach-omap2/board-rx51-peripherals.c index
> 9c2dd10..a993ffe 100644
> --- a/arch/arm/mach-omap2/board-rx51-peripherals.c
> +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
> @@ -25,6 +25,7 @@
> #include <linux/gpio_keys.h>
> #include <linux/mmc/host.h>
> #include <linux/power/isp1704_charger.h>
> +#include <linux/power/bq2415x_charger.h>
> #include <linux/platform_data/spi-omap2-mcspi.h>
> #include <linux/platform_data/mtd-onenand-omap2.h>
>
> @@ -270,6 +271,44 @@ static struct platform_device
> rx51_battery_device = { .id = -1,
> };
>
> +static enum bq2415x_mode rx51_charger_mode =
> BQ2415X_MODE_OFF; +static void *rx51_charger_hook_data;
> +static void (*rx51_charger_hook)(enum bq2415x_mode mode, void
> *data); +
> +static int rx51_charger_set_hook(
> + void (*hook)(enum bq2415x_mode mode, void *data), void
> *data) +{
> + rx51_charger_hook = hook;
> + rx51_charger_hook_data = data;
> + if (rx51_charger_hook)
> + rx51_charger_hook(rx51_charger_mode,
> rx51_charger_hook_data); + return 1;
> +}
> +
> +static void rx51_charger_set_current(int mA)
> +{
> + enum bq2415x_mode mode;
> +
> + pr_info("RX-51: Charger current limit is %d mA\n", mA);
> +
> + if (mA == 0)
> + mode = BQ2415X_MODE_OFF;
> + else if (mA < 500)
> + mode = BQ2415X_MODE_NONE;
> + else if (mA < 1800)
> + mode = BQ2415X_MODE_HOST_CHARGER;
> + else
> + mode = BQ2415X_MODE_DEDICATED_CHARGER;
> +
> + if (rx51_charger_mode == mode)
> + return;
> +
> + rx51_charger_mode = mode;
> +
> + if (rx51_charger_hook)
> + rx51_charger_hook(rx51_charger_mode,
> rx51_charger_hook_data); +}
> +
> static void rx51_charger_set_power(bool on)
> {
> gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on);
> @@ -277,6 +316,7 @@ static void rx51_charger_set_power(bool
> on)
>
> static struct isp1704_charger_data rx51_charger_data = {
> .set_power = rx51_charger_set_power,
> + .set_current = rx51_charger_set_current,
> };
>
> static struct platform_device rx51_charger_device = {
> @@ -1017,6 +1057,16 @@ static struct aic3x_pdata
> rx51_aic3x_data2 = { .gpio_reset = 60,
> };
>
> +static struct bq2415x_platform_data
> rx51_bq24150a_platform_data = { + .current_limit = 100,
/*
> mA */
> + .weak_battery_voltage = 3400, /* mV */
> + .battery_regulation_voltage = 4200, /* mV */
> + .charge_current = 650, /* mA */
> + .termination_current = 100, /* mA */
> + .resistor_sense = 68, /* m ohm */
> + .set_mode_hook = &rx51_charger_set_hook,
> +};
> +
> static struct i2c_board_info __initdata
> rx51_peripherals_i2c_board_info_2[] = { {
> I2C_BOARD_INFO("tlv320aic3x", 0x18),
> @@ -1044,7 +1094,11 @@ static struct i2c_board_info __initdata
> rx51_peripherals_i2c_board_info_2[] = { {
> I2C_BOARD_INFO("tpa6130a2", 0x60),
> .platform_data = &rx51_tpa6130a2_data,
> - }
> + },
> + {
> + I2C_BOARD_INFO("bq24150a", 0x6b),
> + .platform_data = &rx51_bq24150a_platform_data,
> + },
> };
>
> static struct i2c_board_info __initdata
> rx51_peripherals_i2c_board_info_3[] = {Tony, can you look and review this board patch? I think that this patch series it the most important for Nokia N900, because it finally bringing charging support. And without charging battery it very hard to use phone which has power supply only from battery. -- Pali Rohár pali.ro...@gmail.com
signature.asc
Description: This is a digitally signed message part.
