From: Benoit Parrot <bpar...@ti.com> Add LCDC device node in DT for am33xx Add LCDC and Panel info in DT for am335x-evm
Changes: - remove redundant/unnecessary SoC specific setting in the board dts - resolved conflicts on for_3.13/dts Signed-off-by: Benoit Parrot <bpar...@ti.com> Signed-off-by: Joel Fernandes <jo...@ti.com> --- arch/arm/boot/dts/am335x-evm.dts | 71 ++++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/am33xx.dtsi | 9 +++++ 2 files changed, 80 insertions(+) diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 86463fa..b73f41f 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -85,6 +85,40 @@ brightness-levels = <0 51 53 56 62 75 101 152 255>; default-brightness-level = <8>; }; + + panel { + compatible = "ti,tilcdc,panel"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins_s0>; + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <32>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + + display-timings { + 800x480p62 { + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <39>; + hback-porch = <39>; + hsync-len = <47>; + vback-porch = <29>; + vfront-porch = <13>; + vsync-len = <2>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; }; &am33xx_pinmux { @@ -212,6 +246,39 @@ 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) >; }; + + lcd_pins_s0: lcd_pins_s0 { + pinctrl-single,pins = < + 0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */ + 0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */ + 0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */ + 0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */ + 0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */ + 0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */ + 0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */ + 0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */ + 0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT | MODE0 */ + 0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT | MODE0 */ + 0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT | MODE0 */ + 0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT | MODE0 */ + 0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT | MODE0 */ + 0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT | MODE0 */ + 0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT | MODE0 */ + 0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT | MODE0 */ + 0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT | MODE0 */ + 0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT | MODE0 */ + 0xc8 0x00 /* lcd_data10.lcd_data10, OUTPUT | MODE0 */ + 0xcc 0x00 /* lcd_data11.lcd_data11, OUTPUT | MODE0 */ + 0xd0 0x00 /* lcd_data12.lcd_data12, OUTPUT | MODE0 */ + 0xd4 0x00 /* lcd_data13.lcd_data13, OUTPUT | MODE0 */ + 0xd8 0x00 /* lcd_data14.lcd_data14, OUTPUT | MODE0 */ + 0xdc 0x00 /* lcd_data15.lcd_data15, OUTPUT | MODE0 */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */ + >; + }; }; &uart0 { @@ -308,6 +375,10 @@ }; }; +&lcdc { + status = "okay"; +}; + &elm { status = "okay"; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 1a5575d..25578ea 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -682,6 +682,15 @@ status = "disabled"; }; + lcdc: lcdc@4830e000 { + compatible = "ti,am33xx-tilcdc"; + reg = <0x4830e000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <36>; + ti,hwmods = "lcdc"; + status = "disabled"; + }; + tscadc: tscadc@44e0d000 { compatible = "ti,am3359-tscadc"; reg = <0x44e0d000 0x1000>; -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html