Hi Roger, Yes, I will. I've been waiting for these ones for so long :-)
Thanks, Benoit On 03/10/2013 12:34, Roger Quadros wrote:
Hi Benoit, Could you please take the device tree related patches [5 to 10] in this series? Thanks. cheers, -roger On 09/24/2013 11:53 AM, Roger Quadros wrote:We no longer need to model the RESET line as a regulator since the USB phy-nop driver accepts "reset-gpios" property. Signed-off-by: Roger Quadros <rog...@ti.com> --- arch/arm/boot/dts/omap3-beagle.dts | 13 +------------ 1 files changed, 1 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index dfd8310..71bde47 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -44,17 +44,6 @@ }; }; - /* HS USB Port 2 RESET */ - hsusb2_reset: hsusb2_reset_reg { - compatible = "regulator-fixed"; - regulator-name = "hsusb2_reset"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio5 19 0>; /* gpio_147 */ - startup-delay-us = <70000>; - enable-active-high; - }; - /* HS USB Port 2 Power */ hsusb2_power: hsusb2_power_reg { compatible = "regulator-fixed"; @@ -68,7 +57,7 @@ /* HS USB Host PHY on PORT 2 */ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; - reset-supply = <&hsusb2_reset>; + reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ vcc-supply = <&hsusb2_power>; };
-- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
