On 09/06/2013 12:12 PM, Archit Taneja wrote:
> Add support for the de-interlacer block in VPE.
>
> For de-interlacer to work, we need to enable 2 more sets of VPE input ports
> which fetch data from the 'last' and 'last to last' fields of the interlaced
> video. Apart from that, we need to enable the Motion vector output and input
> ports, and also allocate DMA buffers for them.
>
> We need to make sure that two most recent fields in the source queue are
> available and in the 'READY' state. Once a mem2mem context gets access to the
> VPE HW(in device_run), it extracts the addresses of the 3 buffers, and
> provides
> it to the data descriptors for the 3 sets of input ports((LUMA1, CHROMA1),
> (LUMA2, CHROMA2), and (LUMA3, CHROMA3)) respectively for the 3 consecutive
> fields. The motion vector and output port descriptors are configured and the
> list is submitted to VPDMA.
>
> Once the transaction is done, the v4l2 buffer corresponding to the oldest
> field(the 3rd one) is changed to the state 'DONE', and the buffers
> corresponding
> to 1st and 2nd fields become the 2nd and 3rd field for the next de-interlace
> operation. This way, for each deinterlace operation, we have the 3 most recent
> fields. After each transaction, we also swap the motion vector buffers, the
> new
> input motion vector buffer contains the resultant motion information of all
> the
> previous frames, and the new output motion vector buffer will be used to hold
> the updated motion vector to capture the motion changes in the next field. The
> motion vector buffers are allocated using the DMA allocation API.
>
> The de-interlacer is removed from bypass mode, it requires some extra default
> configurations which are now added. The chrominance upsampler coefficients are
> added for interlaced frames. Some VPDMA parameters like frame start event and
> line mode are configured for the 2 extra sets of input ports.
>
> Signed-off-by: Archit Taneja <arc...@ti.com>
Acked-by: Hans Verkuil <hans.verk...@cisco.com>
Regards,
Hans
> ---
> drivers/media/platform/ti-vpe/vpe.c | 392
> ++++++++++++++++++++++++++++++++----
> 1 file changed, 358 insertions(+), 34 deletions(-)
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
