On 11/21/2013 10:58 AM, Tony Lindgren wrote: > * Balaji T K <balaj...@ti.com> [131121 05:51]: >> pin mux wl12xx_gpio and wl12xx_pins should be part of omap4_pmx_core >> and not omap4_pmx_wkup. So, move wl12xx_* to omap4_pmx_core. >> >> Fix the following error message: >> pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38) >> pinctrl-single 4a31e040.pinmux: could not add functions for >> pinmux_wl12xx_pins 56x
Why is the led pins moved then? >> SDIO card is not detected after moving pin mux to omap4_pmx_core since >> sdmmc5_clk pull is disabled. Enable Pull up on sdmmc5_clk to detect SDIO >> card. > Cool, does this fix the issue with the WLAN not coming up after a warm reset > on panda? > > Regards, > > Tony > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- ------------------ Dan Murphy -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
