In DT case, PBAIS registers are programmed via regulator,
use regulator APIs to control PBIAS.

Signed-off-by: Balaji T K <balaj...@ti.com>
---
 drivers/mmc/host/omap_hsmmc.c |   39 +++++++++++++++++++++++++++++++++++++++
 1 files changed, 39 insertions(+), 0 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 342be25..0a390f8 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -126,6 +126,10 @@
 #define OMAP_MMC_MAX_CLOCK     52000000
 #define DRIVER_NAME            "omap_hsmmc"
 
+#define VDD_1V8                        1800000         /* 180000 uV */
+#define VDD_3V0                        3000000         /* 300000 uV */
+#define VDD_165_195            (ffs(MMC_VDD_165_195) - 1)
+
 /*
  * One controller can have multiple slots, like on some omap boards using
  * omap.c controller driver. Luckily this is not currently done on any known
@@ -164,6 +168,8 @@ struct omap_hsmmc_host {
         */
        struct  regulator       *vcc;
        struct  regulator       *vcc_aux;
+       struct  regulator       *pbias;
+       bool                    pbias_enabled;
        int                     pbias_disable;
        void    __iomem         *base;
        resource_size_t         mapbase;
@@ -272,6 +278,15 @@ static int omap_hsmmc_set_power(struct device *dev, int 
slot, int power_on,
        if (mmc_slot(host).before_set_reg)
                mmc_slot(host).before_set_reg(dev, slot, power_on, vdd);
 
+       if (host->pbias) {
+               if (host->pbias_enabled == 1) {
+                       ret = regulator_disable(host->pbias);
+                       if (!ret)
+                               host->pbias_enabled = 0;
+               }
+               regulator_set_voltage(host->pbias, VDD_3V0, VDD_3V0);
+       }
+
        /*
         * Assume Vcc regulator is used only to power the card ... OMAP
         * VDDS is used to power the pins, optionally with a transceiver to
@@ -306,9 +321,29 @@ static int omap_hsmmc_set_power(struct device *dev, int 
slot, int power_on,
                }
        }
 
+       if (host->pbias) {
+               if (vdd <= VDD_165_195)
+                       ret = regulator_set_voltage(host->pbias, VDD_1V8,
+                                                               VDD_1V8);
+               else
+                       ret = regulator_set_voltage(host->pbias, VDD_3V0,
+                                                               VDD_3V0);
+               if (ret < 0)
+                       goto error_set_power;
+
+               if (host->pbias_enabled == 0) {
+                       ret = regulator_enable(host->pbias);
+                       if (!ret) {
+                               host->pbias_enabled = 1;
+                               goto error_set_power;
+                       }
+               }
+       }
+
        if (mmc_slot(host).after_set_reg)
                mmc_slot(host).after_set_reg(dev, slot, power_on, vdd);
 
+error_set_power:
        return ret;
 }
 
@@ -342,6 +377,9 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
        reg = devm_regulator_get_optional(host->dev, "vmmc_aux");
        host->vcc_aux = IS_ERR(reg) ? NULL : reg;
 
+       reg = devm_regulator_get_optional(host->dev, "pbias");
+       host->pbias = IS_ERR(reg) ? NULL : reg;
+
        /* For eMMC do not power off when not in sleep state */
        if (mmc_slot(host).no_regulator_off_init)
                return 0;
@@ -1808,6 +1846,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
        host->base      = ioremap(host->mapbase, SZ_4K);
        host->power_mode = MMC_POWER_OFF;
        host->next_data.cookie = 1;
+       host->pbias_enabled = 0;
 
        platform_set_drvdata(pdev, host);
 
-- 
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to