In qspi controller, we need to switch to memory mapped operations.
These switching depends on
1. For DRA7x: qspi register bit and control module register.
2. For AM437x: qspi register bit.
Hence add support for parsing control module register and provide a
flag "ctrl_mod" which can be used for conditional execution of
control module part.
Signed-off-by: Sourav Poddar <sourav.pod...@ti.com>
---
drivers/spi/spi-ti-qspi.c | 17 ++++++++++++++++-
1 files changed, 16 insertions(+), 1 deletions(-)
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 67aa905..776e93d 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -46,6 +46,7 @@ struct ti_qspi {
struct spi_master *master;
void __iomem *base;
+ void __iomem *ctrl_base;
struct clk *fclk;
struct device *dev;
@@ -54,6 +55,8 @@ struct ti_qspi {
u32 spi_max_frequency;
u32 cmd;
u32 dc;
+
+ bool ctrl_mod;
};
#define QSPI_PID (0x0)
@@ -437,7 +440,7 @@ static int ti_qspi_probe(struct platform_device *pdev)
{
struct ti_qspi *qspi;
struct spi_master *master;
- struct resource *r;
+ struct resource *r, *res_ctrl;
struct device_node *np = pdev->dev.of_node;
u32 max_freq;
int ret = 0, num_cs, irq;
@@ -471,6 +474,9 @@ static int ti_qspi_probe(struct platform_device *pdev)
return -ENODEV;
}
+ res_ctrl = platform_get_resource_byname(pdev,
+ IORESOURCE_MEM, "qspi_ctrlmod");
+
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "no irq resource?\n");
@@ -485,6 +491,15 @@ static int ti_qspi_probe(struct platform_device *pdev)
goto free_master;
}
+ if (res_ctrl) {
+ qspi->ctrl_mod = true;
+ qspi->ctrl_base = devm_ioremap_resource(&pdev->dev, res_ctrl);
+ if (IS_ERR(qspi->ctrl_base)) {
+ ret = PTR_ERR(qspi->ctrl_base);
+ goto free_master;
+ }
+ }
+
ret = devm_request_irq(&pdev->dev, irq, ti_qspi_isr, 0,
dev_name(&pdev->dev), qspi);
if (ret < 0) {
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
