From: Sourav Poddar Date: Sat, 5 Oct 2013 05:19:46 +0530 <sourav.pod...@ti.com>
Add pwm backlight support for am43x epos evm.
Signed-off-by: Sourav Poddar <sourav.pod...@ti.com>
---
arch/arm/boot/dts/am43x-epos-evm.dts | 24 ++++++++++++++++++++++++
1 files changed, 24 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts
b/arch/arm/boot/dts/am43x-epos-evm.dts
index a037a92..5521999 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -13,6 +13,7 @@
#include "am4372.dtsi"
#include <dt-bindings/pinctrl/am43xx.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "TI AM43x EPOS EVM";
@@ -90,6 +91,12 @@
0x9c (PIN_INPUT_PULLUP | MUX_MODE3)
>;
};
+
+ ecap0_pins: backlight_pins {
+ pinctrl-single,pins = <
+ 0x164 MUX_MODE0 /*
eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+ >;
+ };
};
matrix_keypad: matrix_keypad@0 {
@@ -124,6 +131,13 @@
0x0203006c /* DOWN */
0x03030069>; /* LEFT */
};
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 51 53 56 62 75 101 152 255>;
+ default-brightness-level = <8>;
+ };
};
&mmc1 {
@@ -212,3 +226,13 @@
spi-rx-bus-width = <4>;
};
};
+
+&epwmss0 {
+ status = "okay";
+};
+
+&ecap0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap0_pins>;
+};
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
