Hi, On Tue, Dec 3, 2013 at 9:58 AM, Kishon Vijay Abraham I <kis...@ti.com> wrote: > Hi, > > On Tuesday 03 December 2013 02:03 PM, Marek Belisko wrote: >> Without this change when booting omap3 device (gta04) with board file >> leads to follwing errors: >> >> [ 1.203308] musb-hdrc musb-hdrc.0.auto: unable to find phy >> [ 1.209075] HS USB OTG: no transceiver configured >> [ 1.214019] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with >> status -517 >> >> and usb isn't working. >> >> This is probably regression caused by commit: 6c27f939 > > I think a better fix would be to have this merged.. > https://lkml.org/lkml/2013/7/26/91 Yes I see but how this could help with current situation? Ho you then specify device number? This patch is fixing 3.13-rcx regression.
>> >> Signed-off-by: Marek Belisko <marek.beli...@open-nandra.com> >> --- >> arch/arm/mach-omap2/twl-common.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/arch/arm/mach-omap2/twl-common.c >> b/arch/arm/mach-omap2/twl-common.c >> index b0d54da..3640ce0 100644 >> --- a/arch/arm/mach-omap2/twl-common.c >> +++ b/arch/arm/mach-omap2/twl-common.c >> @@ -92,7 +92,7 @@ void __init omap_pmic_late_init(void) >> >> #if defined(CONFIG_ARCH_OMAP3) >> struct phy_consumer consumers[] = { >> - PHY_CONSUMER("musb-hdrc.0", "usb"), >> + PHY_CONSUMER("musb-hdrc.0.auto", "usb"), > > the index '0' might vary for some boards leading it to again break musb. If you run grep for musb-hdrc : arch/arm/mach-omap2/board-3430sdp.c: usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); arch/arm/mach-omap2/board-devkit8000.c: usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); arch/arm/mach-omap2/board-overo.c: usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); arch/arm/mach-omap2/board-omap3beagle.c: usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); arch/arm/mach-omap2/board-omap3touchbook.c: usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); arch/arm/mach-omap2/board-cm-t35.c: usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); arch/arm/mach-omap2/board-omap3stalker.c: usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); arch/arm/mach-omap2/board-omap3logic.c: usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); arch/arm/mach-omap2/board-2430sdp.c: usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); arch/arm/mach-omap2/board-ldp.c: usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); arch/arm/mach-omap2/board-rx51.c: usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); arch/arm/mach-omap2/board-omap3pandora.c: usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); Until mentioned patch isn't merged and PHY_CONSUMER isn't updated I think this is correct solution. > > Thanks > Kishon BR, marek -- as simple and primitive as possible ------------------------------------------------- Marek Belisko - OPEN-NANDRA Freelance Developer Ruska Nova Ves 219 | Presov, 08005 Slovak Republic Tel: +421 915 052 184 skype: marekwhite twitter: #opennandra web: http://open-nandra.com -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html