This patch updates starting offset for free bytes in OOB which can be used by
file-systems to store their metadata (like clean-marker in case of JFFS2).
Signed-off-by: Pekon Gupta <pe...@ti.com>
---
drivers/mtd/nand/omap2.c | 17 ++++-------------
1 file changed, 4 insertions(+), 13 deletions(-)
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index f777250..bbdb5e8 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -1835,8 +1835,6 @@ static int omap_nand_probe(struct platform_device *pdev)
ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH;
else
ecclayout->eccpos[0] = 1;
- ecclayout->oobfree->offset = ecclayout->eccpos[0] +
- ecclayout->eccbytes;
break;
case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
@@ -1854,8 +1852,6 @@ static int omap_nand_probe(struct platform_device *pdev)
(mtd->writesize /
nand_chip->ecc.size);
ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH;
- ecclayout->oobfree->offset = ecclayout->eccpos[0] +
- ecclayout->eccbytes;
/* software bch library is used for locating errors */
nand_chip->ecc.priv = nand_bch_init(mtd,
nand_chip->ecc.size,
@@ -1890,8 +1886,6 @@ static int omap_nand_probe(struct platform_device *pdev)
(mtd->writesize /
nand_chip->ecc.size);
ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH;
- ecclayout->oobfree->offset = ecclayout->eccpos[0] +
- ecclayout->eccbytes;
/* This ECC scheme requires ELM H/W block */
if (is_elm_present(info, pdata->elm_of_node, BCH4_ECC) < 0) {
pr_err("nand: error: could not initialize ELM\n");
@@ -1920,8 +1914,6 @@ static int omap_nand_probe(struct platform_device *pdev)
(mtd->writesize /
nand_chip->ecc.size);
ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH;
- ecclayout->oobfree->offset = ecclayout->eccpos[0] +
- ecclayout->eccbytes;
/* software bch library is used for locating errors */
nand_chip->ecc.priv = nand_bch_init(mtd,
nand_chip->ecc.size,
@@ -1963,8 +1955,6 @@ static int omap_nand_probe(struct platform_device *pdev)
(mtd->writesize /
nand_chip->ecc.size);
ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH;
- ecclayout->oobfree->offset = ecclayout->eccpos[0] +
- ecclayout->eccbytes;
break;
#else
pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n");
@@ -1978,9 +1968,6 @@ static int omap_nand_probe(struct platform_device *pdev)
goto return_error;
}
- /* populate remaining ECC layout data */
- ecclayout->oobfree->length = mtd->oobsize - (BADBLOCK_MARKER_LENGTH +
- ecclayout->eccbytes);
for (i = 1; i < ecclayout->eccbytes; i++)
ecclayout->eccpos[i] = ecclayout->eccpos[0] + i;
/* check if NAND device's OOB is enough to store ECC signatures */
@@ -1990,6 +1977,10 @@ static int omap_nand_probe(struct platform_device *pdev)
err = -EINVAL;
goto return_error;
}
+ /* populate remaining ECC layout data */
+ ecclayout->oobfree->offset = ecclayout->eccpos[ecclayout->eccbytes] + 1;
+ ecclayout->oobfree->length = mtd->oobsize - (BADBLOCK_MARKER_LENGTH +
+ ecclayout->eccbytes);
/* second phase scan */
if (nand_scan_tail(mtd)) {
--
1.8.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
