Am Samstag 12 August 2006 12:37 schrieb Russell King: > On Sat, Aug 12, 2006 at 11:12:00AM +0200, Jan T?njes wrote: > > Am Samstag 12 August 2006 10:23 schrieb Russell King: > > > On Sat, Aug 12, 2006 at 02:24:03AM +0200, Jan T?njes wrote: > > > > i am using gentoo linux kernel 2.6.17-gentoo-r4, i have pcmciautils > > > > v. 0.14 installed and everything is ok, but when i insert my card it > > > > tells me: > > > > > > > > Aug 12 02:15:26 alitoh pccard: PCMCIA card inserted into slot 0 > > > > Aug 12 02:15:26 alitoh pcmcia: registering new device pcmcia0.0 > > > > Aug 12 02:15:27 alitoh serial_cs: serial8250_register_port() at > > > > 0x03e8, irq 10 failed > > > > > > Please do: cat /proc/tty/driver/serial and send the output. > > > > Good Morning! :-) > > > > alitoh pcmcia # cat /proc/tty/driver/serial > > serinfo:1.0 driver revision: > > 0: uart:8250 port:00008828 irq:5 tx:0 rx:0 > > 1: uart:8250 port:00008840 irq:5 tx:0 rx:0 > > 2: uart:8250 port:00008850 irq:5 tx:0 rx:0 > > 3: uart:8250 port:00008860 irq:5 tx:0 rx:0 > > alitoh pcmcia # > > > > ;-) There seems to be the Problem. What can I do "against" it? > > You appear to have no free uart slots. Try booting with 8250.nr_uarts=8 > if 8250 is built-in, or loading the 8250 module with nr_uarts=8.
Thanks a lot! It didn't work first, but then I recompiled my kernel with (8) Maximum number of 8250/16550 serial ports (was 4 before) and passed the bootoption to the kernel. Thanks for your help and have a nice weekend :-) Greetings, Jan _______________________________________________ Linux PCMCIA reimplementation list http://lists.infradead.org/mailman/listinfo/linux-pcmcia
