On Mon, Aug 18, 2008 at 08:53:09PM +0200, Dominik Brodowski wrote:
> Remove the three remaining pcmcia_get_configuration_info() users:
> - pcmciamtd is marked broken anyway.
> - serial_cs.c can access the relevant structs directly
> - ipwireless didn't use the output
> 
> CC: [EMAIL PROTECTED]
> CC: Russell King <[EMAIL PROTECTED]>
Acked-by: David Sterba <[EMAIL PROTECTED]>
> Signed-off-by: Dominik Brodowski <[EMAIL PROTECTED]>
> ---
>  drivers/char/pcmcia/ipwireless/main.c |   10 ----------
>  drivers/mtd/maps/pcmciamtd.c          |   12 +-----------
>  drivers/serial/serial_cs.c            |   18 +++++++++---------
>  3 files changed, 10 insertions(+), 30 deletions(-)
> 
> diff --git a/drivers/char/pcmcia/ipwireless/main.c 
> b/drivers/char/pcmcia/ipwireless/main.c
> index 5eca7a9..1f520e5 100644
> --- a/drivers/char/pcmcia/ipwireless/main.c
> +++ b/drivers/char/pcmcia/ipwireless/main.c
> @@ -83,7 +83,6 @@ static int config_ipwireless(struct ipw_dev *ipw)
>  {
>       struct pcmcia_device *link = ipw->link;
>       int ret;
> -     config_info_t conf;
>       tuple_t tuple;
>       unsigned short buf[64];
>       cisparse_t parse;
> @@ -297,15 +296,6 @@ static int config_ipwireless(struct ipw_dev *ipw)
>               goto exit3;
>       }
>  
> -     /* Look up current Vcc */
> -
> -     ret = pcmcia_get_configuration_info(link, &conf);
> -
> -     if (ret != CS_SUCCESS) {
> -             cs_error(link, GetConfigurationInfo, ret);
> -             goto exit4;
> -     }
> -
>       printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": Card type %s\n",
>                       ipw->is_v2_card ? "V2/V3" : "V1");
>       printk(KERN_INFO IPWIRELESS_PCCARD_NAME
> diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
> index 90924fb..8861ca4 100644
> --- a/drivers/mtd/maps/pcmciamtd.c
> +++ b/drivers/mtd/maps/pcmciamtd.c
> @@ -493,7 +493,6 @@ static int pcmciamtd_config(struct pcmcia_device *link)
>       int last_ret = 0, last_fn = 0;
>       int ret;
>       int i;
> -     config_info_t t;
>       static char *probes[] = { "jedec_probe", "cfi_probe" };
>       int new_name = 0;
>  
> @@ -571,10 +570,7 @@ static int pcmciamtd_config(struct pcmcia_device *link)
>       dev->pcmcia_map.map_priv_1 = (unsigned long)dev;
>       dev->pcmcia_map.map_priv_2 = (unsigned long)link->win;
>  
> -     DEBUG(2, "Getting configuration");
> -     CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &t));
> -     DEBUG(2, "Vcc = %d Vpp1 = %d Vpp2 = %d", t.Vcc, t.Vpp1, t.Vpp2);
> -     dev->vpp = (vpp) ? vpp : t.Vpp1;
> +     dev->vpp = (vpp) ? vpp : link->socket.socket.Vpp;
>       link->conf.Attributes = 0;
>       if(setvpp == 2) {
>               link->conf.Vpp = dev->vpp;
> @@ -583,13 +579,7 @@ static int pcmciamtd_config(struct pcmcia_device *link)
>       }
>  
>       link->conf.IntType = INT_MEMORY;
> -     link->conf.ConfigBase = t.ConfigBase;
> -     link->conf.Status = t.Status;
> -     link->conf.Pin = t.Pin;
> -     link->conf.Copy = t.Copy;
> -     link->conf.ExtStatus = t.ExtStatus;
>       link->conf.ConfigIndex = 0;
> -     link->conf.Present = t.Present;
>       DEBUG(2, "Setting Configuration");
>       ret = pcmcia_request_configuration(link, &link->conf);
>       if(ret != CS_SUCCESS) {
> diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
> index 2427eee..4fed877 100644
> --- a/drivers/serial/serial_cs.c
> +++ b/drivers/serial/serial_cs.c
> @@ -488,23 +488,23 @@ static int simple_config_check_notpicky(struct 
> pcmcia_device *p_dev,
>  static int simple_config(struct pcmcia_device *link)
>  {
>       struct serial_info *info = link->priv;
> -     config_info_t config;
> -     int i, try;
> +     int i = -ENODEV, try;
>  
>       /* If the card is already configured, look up the port and irq */
> -     i = pcmcia_get_configuration_info(link, &config);
> -     if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) {
> +     if (link->function_config) {
>               unsigned int port = 0;
> -             if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) {
> -                     port = config.BasePort2;
> +             if ((link->io.BasePort2 != 0) &&
> +                 (link->io.NumPorts2 == 8)) {
> +                     port = link->io.BasePort2;
>                       info->slave = 1;
>               } else if ((info->manfid == MANFID_OSITECH) &&
> -                        (config.NumPorts1 == 0x40)) {
> -                     port = config.BasePort1 + 0x28;
> +                        (link->io.NumPorts1 == 0x40)) {
> +                     port = link->io.BasePort1 + 0x28;
>                       info->slave = 1;
>               }
>               if (info->slave) {
> -                     return setup_serial(link, info, port, 
> config.AssignedIRQ);
> +                     return setup_serial(link, info, port,
> +                                         link->irq.AssignedIRQ);
>               }
>       }
>  
> -- 
> 1.5.4.3
> 

_______________________________________________
Linux PCMCIA reimplementation list
http://lists.infradead.org/mailman/listinfo/linux-pcmcia

Reply via email to