> Please give me some ideas on how I could determine what causes this
> inconclusive behaviour.
As the HCI is working occasionally, I was able to dig up some
additional info about the card. Perhaps it may help:
r...@orion:~/dev/kernel# hciconfig hci0 features
hci0: Type: UART
BD Address: 00:80:98:34:55:46 ACL MTU: 192:8 SCO MTU: 64:8
Features: 0xff 0xff 0x0d 0x00 0x00 0x00 0x00 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offset>
<timing accuracy> <role switch> <hold mode> <sniff mode>
<park state> <RSSI> <channel quality> <SCO link> <HV2 packets>
<HV3 packets> <u-law log> <A-law log> <CVSD> <power control>
<transparent SCO>
r...@orion:~/dev/kernel# hciconfig hci0 commands
Can't read support commands on hci0: Connection timed out (110)
r...@orion:~/dev/kernel# hciconfig hci0 revision
hci0: Type: UART
BD Address: 00:80:98:34:55:46 ACL MTU: 192:8 SCO MTU: 64:8
HCI 12.3
Chip version: BlueCore01b
SCO mapping: HCI
r...@orion:~/dev/kernel# hciconfig hci0 version
hci0: Type: UART
BD Address: 00:80:98:34:55:46 ACL MTU: 192:8 SCO MTU: 64:8
HCI Ver: 1.1 (0x1) HCI Rev: 0x86 LMP Ver: 1.1 (0x1) LMP Subver: 0x86
Manufacturer: Cambridge Silicon Radio (10)
--
Regards,
Janos
_______________________________________________
Linux PCMCIA reimplementation list
http://lists.infradead.org/mailman/listinfo/linux-pcmcia
