Hi, >- Is it just a buggy card if it works at 0x300 but not 0xc300 > (or is it maybe a problem with Linux assigning the io area)? >- Why is IOAddrLines forced to 16 (and thus alignment to 0x10000), but only > if BasePort1 is 0?
Some pcmcia-card decodes only lower 10bits (0x0000-0x03FF). Such card does not work on higher ports (0x0400-0xFFFF) So your card is not a buggy card. Best Regards Komuro _______________________________________________ Linux PCMCIA reimplementation list http://lists.infradead.org/mailman/listinfo/linux-pcmcia
