Hi,
When the 3com card does not work,
the card_id and prod_id becomes the bogus value.
The card_id should be 0x0562.
the prod_id(2) should be "3C562D/3C563D"
[Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:04:06.0)
Configuration: state: on ready: yes
Voltage: 5.0V Vcc: 5.0V Vpp: 0.0V
Socket 0 Device 0: [3c589_cs] (bus ID: 0.0)
Configuration: state: on
Product Name: 3Com Corporation 3C EtherLink III LAN+Modem PC Card
Identification: manf_id: 0x0101 card_id: 0xffff
function: 6 (network)
prod_id(1): "3Com Corporation" (0xe1c0d2aa)
prod_id(2): "3C" (0x1bbe751a)
prod_id(3): "EtherLink III" (0xc9a029c2)
prod_id(4): "LAN+Modem PC Card" (0x32d830f4)
Socket 0 Device 1: [serial_cs] (bus ID: 0.1)
Configuration: state: on
Product Name: 3Com Corporation 3C EtherLink III LAN+Modem PC Card
Identification: manf_id: 0x0101 card_id: 0xffff
function: 6 (network)
prod_id(1): "3Com Corporation" (0xe1c0d2aa)
prod_id(2): "3C" (0x1bbe751a)
prod_id(3): "EtherLink III" (0xc9a029c2)
prod_id(4): "LAN+Modem PC Card" (0x32d830f4)
_______________________________________________
Linux PCMCIA reimplementation list
http://lists.infradead.org/mailman/listinfo/linux-pcmcia
