Hi,
>> Actually, ioport 0x0-0xff is used for onboard legacy devices.
>> So it should be excluded?
>
>Probably -- and none of the devices listed below seem to actually be PCI
>devcices... However, I have no idea why there is a "PCI Bus 0000:00" here.
>Oh wait. Is this the PC in which both pd6729 and yenta_socket are installed?
sorry,
This PC is different with the PC with pd6729 and yenta_socket are installed.
Here is the dmesg and lspci -vvv
[dmesg]
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.34-rc2 (r...@localhost.localdomain) (gcc version 4.4.0
20090506 (Red Hat 4.4.0-4) (GCC) ) #1 SMP Sun Mar 21 20:58:10 JST 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000b7b6c000 (usable)
BIOS-e820: 00000000b7b6c000 - 00000000b7bbf000 (reserved)
BIOS-e820: 00000000b7bbf000 - 00000000b7c86000 (usable)
BIOS-e820: 00000000b7c86000 - 00000000b7cbf000 (ACPI NVS)
BIOS-e820: 00000000b7cbf000 - 00000000b7ced000 (usable)
BIOS-e820: 00000000b7ced000 - 00000000b7cff000 (ACPI data)
BIOS-e820: 00000000b7cff000 - 00000000b7d00000 (usable)
BIOS-e820: 00000000b7d00000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x140000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-CFFFF uncachable
D0000-DFFFF write-protect
E0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0FFFE0000 mask FFFFE0000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0B8000000 mask FF8000000 uncachable
4 base 0B7E00000 mask FFFE00000 uncachable
5 base 0B7D00000 mask FFFF00000 uncachable
6 base 100000000 mask FC0000000 write-back
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 00e00000
init_memory_mapping: 0000000000000000-00000000375fe000
0000000000 - 0000200000 page 4k
0000200000 - 0037400000 page 2M
0037400000 - 00375fe000 page 4k
kernel direct mapping tables up to 375fe000 @ 7000-f000
RAMDISK: 37ce2000 - 37fef817
Allocated new RAMDISK: 009f5000 - 00d02817
Move RAMDISK from 0000000037ce2000 - 0000000037fef816 to 009f5000 - 00d02816
ACPI: RSDP 000fe020 00024 (v02 TOSINV)
ACPI: XSDT b7cfe120 00064 (v01 TOSINV TOSINV00 00000001 01000013)
ACPI: FACP b7cfd000 000F4 (v04 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: DSDT b7cf0000 08FA8 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: FACS b7c93000 00040
ACPI: HPET b7cfc000 00038 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: APIC b7cfb000 0006C (v02 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: MCFG b7cfa000 0003C (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: ASF! b7cf9000 000A5 (v32 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: SLIC b7cef000 00176 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: BOOT b7cee000 00028 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: SSDT b7ced000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
4234MB HIGHMEM available.
885MB LOWMEM available.
mapped low ram: 0 - 375fe000
low ram: 0 - 375fe000
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
Normal 0x00001000 -> 0x000375fe
HighMem 0x000375fe -> 0x00140000
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
0: 0x00000001 -> 0x0000009f
0: 0x00000100 -> 0x000b7b6c
0: 0x000b7bbf -> 0x000b7c86
0: 0x000b7cbf -> 0x000b7ced
0: 0x000b7cff -> 0x000b7d00
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1014784
free_area_init_node: node 0, pgdat c089d580, node_mem_map c1001020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3966 pages, LIFO batch:0
Normal zone: 1740 pages used for memmap
Normal zone: 220978 pages, LIFO batch:31
HighMem zone: 8469 pages used for memmap
HighMem zone: 779599 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
early_res array is doubled to 64 at [b000 - b7ff]
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 15 pages/cpu @c3a00000 s37460 r0 d23980 u524288
pcpu-alloc: s37460 r0 d23980 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1004543
Kernel command line: ro root=UUID=60fdbf15-a0be-4500-a3b3-3fee3ef7b8b3 rhgb
quiet
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 26214380 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Subtract (56 early reservations)
#1 [0000001000 - 0000002000] EX TRAMPOLINE
#2 [0000400000 - 00009ec6ac] TEXT DATA BSS
#3 [000009fc00 - 0000100000] BIOS reserved
#4 [00009ed000 - 00009f4184] BRK
#5 [0000002000 - 0000003000] TRAMPOLINE
#6 [0000003000 - 0000007000] ACPI WAKEUP
#7 [0000007000 - 000000b000] PGTABLE
#8 [00009f5000 - 0000d02817] NEW RAMDISK
#9 [0001000000 - 0001001000] BOOTMEM
#10 [0001001000 - 0003801000] BOOTMEM
#11 [0003801000 - 0003801004] BOOTMEM
#12 [0003801040 - 0003801100] BOOTMEM
#13 [0003801100 - 00038011a4] BOOTMEM
#14 [00038011c0 - 00038041c0] BOOTMEM
#15 [00038041c0 - 00038044dc] BOOTMEM
#16 [0003804500 - 0003810500] BOOTMEM
#17 [0003810500 - 000381052d] BOOTMEM
#18 [0003810540 - 000381056f] BOOTMEM
#19 [0003810580 - 0003810850] BOOTMEM
#20 [0003810880 - 00038108c0] BOOTMEM
#21 [00038108c0 - 0003810900] BOOTMEM
#22 [0003810900 - 0003810940] BOOTMEM
#23 [0003810940 - 0003810980] BOOTMEM
#24 [0003810980 - 00038109c0] BOOTMEM
#25 [00038109c0 - 0003810a00] BOOTMEM
#26 [0003810a00 - 0003810a40] BOOTMEM
#27 [0003810a40 - 0003810a80] BOOTMEM
#28 [0003810a80 - 0003810ac0] BOOTMEM
#29 [0003810ac0 - 0003810b00] BOOTMEM
#30 [0003810b00 - 0003810b40] BOOTMEM
#31 [0003810b40 - 0003810b80] BOOTMEM
#32 [0003810b80 - 0003810bc0] BOOTMEM
#33 [0003810bc0 - 0003810c00] BOOTMEM
#34 [0003810c00 - 0003810c40] BOOTMEM
#35 [0003810c40 - 0003810c80] BOOTMEM
#36 [0003810c80 - 0003810cc0] BOOTMEM
#37 [0003810cc0 - 0003810d00] BOOTMEM
#38 [0003810d00 - 0003810d40] BOOTMEM
#39 [0003810d40 - 0003810d50] BOOTMEM
#40 [0003810d80 - 0003810dbd] BOOTMEM
#41 [0003810dc0 - 0003810dfd] BOOTMEM
#42 [0003a00000 - 0003a0f000] BOOTMEM
#43 [0003a80000 - 0003a8f000] BOOTMEM
#44 [0003b00000 - 0003b0f000] BOOTMEM
#45 [0003b80000 - 0003b8f000] BOOTMEM
#46 [0003812e00 - 0003812e04] BOOTMEM
#47 [0003812e40 - 0003812e44] BOOTMEM
#48 [0003812e80 - 0003812e90] BOOTMEM
#49 [0003812ec0 - 0003812ed0] BOOTMEM
#50 [0003812f00 - 0003812f98] BOOTMEM
#51 [0003812fc0 - 0003812ff8] BOOTMEM
#52 [0003813000 - 0003817000] BOOTMEM
#53 [0003817000 - 0003897000] BOOTMEM
#54 [0003897000 - 00038d7000] BOOTMEM
#55 [0003b8f000 - 000548efec] BOOTMEM
b 20 - 80 9f
100 100 - 400 400
d03 d20 - 1000 1000
3811 - 3812
38d7 38e0 - 3a00 3a00
3a0f 3a20 - 3a80 3a80
3a8f 3aa0 - 3b00 3b00
3b0f 3b20 - 3b80 3b80
548f 54a0 - 375e0 375fe
Initializing HighMem for node 0 (000375fe:00140000)
Memory: 3982212k/5242880k available (2881k kernel code, 76924k reserved, 1876k
data, 500k init, 3152272k highmem)
virtual kernel memory layout:
fixmap : 0xffad6000 - 0xfffff000 (5284 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc08a6000 - 0xc0923000 ( 500 kB)
.data : 0xc06d0657 - 0xc08a5908 (1876 kB)
.text : 0xc0400000 - 0xc06d0657 (2881 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2260.931 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency..
4521.86 BogoMIPS (lpj=2260931)
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Core revision 20100121
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 16753 entries in 33 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
Booting Node 0, Processors #1
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (9044.16 BogoMIPS).
Time: 18:22:59 Date: 03/22/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base
0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT b7b77c18 0026B (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT b7b75598 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT b7b76e18 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT b7b77f18 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: EC: GPE storm detected, transactions will use polling mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: Power Resource [FN00] (on)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and
report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
pci 0000:00:02.0: reg 10: [mem 0xd4400000-0xd47fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x6140-0x6147]
pci 0000:00:02.1: reg 10: [mem 0xd7900000-0xd79fffff 64bit]
pci 0000:00:1a.0: reg 20: [io 0x60c0-0x60df]
pci 0000:00:1a.1: reg 20: [io 0x60a0-0x60bf]
pci 0000:00:1a.7: reg 10: [mem 0xdab05400-0xdab057ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xdab00000-0xdab03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x6080-0x609f]
pci 0000:00:1d.1: reg 20: [io 0x6060-0x607f]
pci 0000:00:1d.2: reg 20: [io 0x6040-0x605f]
pci 0000:00:1d.3: reg 20: [io 0x6020-0x603f]
pci 0000:00:1d.7: reg 10: [mem 0xdab05000-0xdab053ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0x6138-0x613f]
pci 0000:00:1f.2: reg 14: [io 0x6154-0x6157]
pci 0000:00:1f.2: reg 18: [io 0x6130-0x6137]
pci 0000:00:1f.2: reg 1c: [io 0x6150-0x6153]
pci 0000:00:1f.2: reg 20: [io 0x6110-0x611f]
pci 0000:00:1f.2: reg 24: [io 0x6100-0x610f]
pci 0000:00:1f.3: reg 10: [mem 0xdab05800-0xdab058ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x6000-0x601f]
pci 0000:00:1f.5: reg 10: [io 0x6128-0x612f]
pci 0000:00:1f.5: reg 14: [io 0x614c-0x614f]
pci 0000:00:1f.5: reg 18: [io 0x6120-0x6127]
pci 0000:00:1f.5: reg 1c: [io 0x6148-0x614b]
pci 0000:00:1f.5: reg 20: [io 0x60f0-0x60ff]
pci 0000:00:1f.5: reg 24: [io 0x60e0-0x60ef]
pci 0000:02:00.0: reg 10: [io 0x4000-0x40ff]
pci 0000:02:00.0: reg 18: [mem 0xd4810000-0xd4810fff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xd4800000-0xd480ffff 64bit pref]
pci 0000:02:00.0: unsupported PM cap regs version (7)
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x4000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xd9b00000-0xdaafffff]
pci 0000:00:1c.0: bridge window [mem 0xd4800000-0xd58fffff 64bit pref]
pci 0000:03:00.0: reg 10: [mem 0xd8a00000-0xd8a0ffff 64bit]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it
with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xd8a00000-0xd9afffff]
pci 0000:00:1c.1: bridge window [mem 0xd5900000-0xd68fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 06-07]
pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.4: bridge window [mem 0xd7a00000-0xd89fffff]
pci 0000:00:1c.4: bridge window [mem 0xd6900000-0xd78fffff 64bit pref]
pci 0000:04:06.0: reg 10: [mem 0xd4000000-0xd4000fff]
pci 0000:04:06.0: supports D1 D2
pci 0000:04:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:06.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 04-05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1e.0: bridge window [mem 0xd2000000-0xd40fffff]
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive
decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive
decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 00000000b7b6c000 - 00000000b7ffffff
reserve RAM buffer: 00000000b7c86000 - 00000000b7ffffff
reserve RAM buffer: 00000000b7ced000 - 00000000b7ffffff
reserve RAM buffer: 00000000b7d00000 - 00000000b7ffffff
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1e.0 BAR 7
[io 0x1000-0x1fff]
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x0810-0x0817] has been reserved
system 00:01: [io 0x0820-0x0823] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0580-0x05ff] has been reserved
system 00:01: [io 0x0600-0x0627] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xff800000-0xffffffff] could not be reserved
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x4000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xd9b00000-0xdaafffff]
pci 0000:00:1c.0: bridge window [mem 0xd4800000-0xd58fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xd8a00000-0xd9afffff]
pci 0000:00:1c.1: bridge window [mem 0xd5900000-0xd68fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 06-07]
pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.4: bridge window [mem 0xd7a00000-0xd89fffff]
pci 0000:00:1c.4: bridge window [mem 0xd6900000-0xd78fffff 64bit pref]
pci 0000:04:06.0: BAR 9: assigned [mem 0xdc000000-0xdfffffff pref]
pci 0000:04:06.0: BAR 10: assigned [mem 0xe0000000-0xe3ffffff]
pci 0000:04:06.0: BAR 7: assigned [io 0x1000-0x10ff]
pci 0000:04:06.0: BAR 8: assigned [io 0x1400-0x14ff]
pci 0000:04:06.0: CardBus bridge to [bus 05-05]
pci 0000:04:06.0: bridge window [io 0x1000-0x10ff]
pci 0000:04:06.0: bridge window [io 0x1400-0x14ff]
pci 0000:04:06.0: bridge window [mem 0xdc000000-0xdfffffff pref]
pci 0000:04:06.0: bridge window [mem 0xe0000000-0xe3ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 04-05]
pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1e.0: bridge window [mem 0xd2000000-0xd40fffff]
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.4: enabling device (0000 -> 0003)
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:04:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:04:06.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io 0x4000-0x5fff]
pci_bus 0000:02: resource 1 [mem 0xd9b00000-0xdaafffff]
pci_bus 0000:02: resource 2 [mem 0xd4800000-0xd58fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xd8a00000-0xd9afffff]
pci_bus 0000:03: resource 2 [mem 0xd5900000-0xd68fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:06: resource 1 [mem 0xd7a00000-0xd89fffff]
pci_bus 0000:06: resource 2 [mem 0xd6900000-0xd78fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:04: resource 1 [mem 0xd2000000-0xd40fffff]
pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd1ffffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:05: resource 0 [io 0x1000-0x10ff]
pci_bus 0000:05: resource 1 [io 0x1400-0x14ff]
pci_bus 0000:05: resource 2 [mem 0xdc000000-0xdfffffff pref]
pci_bus 0000:05: resource 3 [mem 0xe0000000-0xe3ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3126k freed
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1269282181.575:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
msgmni has been set to 1627
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
pci-stub: invalid id string ""
ACPI: AC Adapter [ADP0] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (20 C)
isapnp: Scanning for PnP cards...
ACPI: Battery Slot [BAT0] (battery present)
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel GM45 Chipset
agpgart-intel 0000:00:00.0: detected 131068K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x6138 ctl 0x6154 bmdma 0x6110 irq 19
ata2: SATA max UDMA/133 cmd 0x6130 ctl 0x6150 bmdma 0x6118 irq 19
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x6128 ctl 0x614c bmdma 0x60f0 irq 19
ata4: SATA max UDMA/133 cmd 0x6120 ctl 0x6148 bmdma 0x60f8 irq 19
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdab05400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.34-rc2 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdab05000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.34-rc2 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060c0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.34-rc2 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000060a0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.34-rc2 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00006080
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.34-rc2 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006060
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.34-rc2 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 16, io base 0x00006040
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.34-rc2 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: irq 18, io base 0x00006020
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.34-rc2 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.3
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 2:367:393
pci_express 0000:00:1c.4:pcie08: hash matches
Initalizing network drop monitor service
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input3
ata2: SATA link down (SStatus 0 SControl 300)
usb 1-4: new high speed USB device using ehci_hcd and address 2
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: TOSHIBA MK2552GSX, LV010M, max UDMA/100
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2552GS LV01 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda:
usb 1-4: New USB device found, idVendor=0bda, idProduct=0158
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: USB2.0-CRW
usb 1-4: Manufacturer: Generic
usb 1-4: SerialNumber: 20071114173400000
sda1 sda2 sda3 sda4 <
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RT04, max UDMA/133
ata4.00: configured for UDMA/133
scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50N RT04 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
Freeing unused kernel memory: 500k freed
Write protecting the kernel text: 2884k
Write protecting the kernel read-only data: 1464k
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 27 for MSI/MSI-X
[drm] set up 127M of stolen space
usb 5-1: new low speed USB device using uhci_hcd and address 2
Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa04000
synaptics: Toshiba dynabook EX/63H detected, limiting rate to 40pps.
usb 5-1: New USB device found, idVendor=0d62, idProduct=2050
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
input: HID 0d62:2050 as
/devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input5
generic-usb 0003:0D62:2050.0001: input,hidraw0: USB HID v1.10 Mouse [HID
0d62:2050] on usb-0000:00:1d.0-1/input0
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
registered panic notifier
acpi device:02: registered as cooling_device3
input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda3): mounted filesystem with writeback data mode
udev: starting version 141
yenta_cardbus 0000:04:06.0: CardBus bridge found [1179:ff66]
yenta_cardbus 0000:04:06.0: ISA IRQ mask 0x0ca8, PCI irq 18
yenta_cardbus 0000:04:06.0: Socket status: 30000410
yenta_cardbus 0000:04:06.0: pcmcia: parent PCI bridge I/O window: 0x1000 -
0x1fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x1000-0x1fff: clean.
yenta_cardbus 0000:04:06.0: pcmcia: parent PCI bridge Memory window: 0xd2000000
- 0xd40fffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xd2000000-0xd40fffff: excluding
0xd3ef0000-0xd40fffff
yenta_cardbus 0000:04:06.0: pcmcia: parent PCI bridge Memory window: 0xd0000000
- 0xd1ffffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xd1ffffff: excluding
0xd0000000-0xd1ffffff
yenta_cardbus 0000:04:06.0: pcmcia: parent PCI bridge I/O window: 0x0 - 0xcf7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x0-0xcf7: clean.
yenta_cardbus 0000:04:06.0: pcmcia: parent PCI bridge I/O window: 0xd00 - 0xffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd00-0xffff: clean.
yenta_cardbus 0000:04:06.0: pcmcia: parent PCI bridge Memory window: 0xa0000 -
0xbffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0a0000-0x0bffff: excluding
0xa0000-0xbffff
yenta_cardbus 0000:04:06.0: pcmcia: parent PCI bridge Memory window: 0xc0000000
- 0xfebfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0000000-0xfebfffff: excluding
0xc0000000-0xd1ffffff 0xd4000000-0xdaffffff 0xdc000000-0xe3ffffff
0xf8000000-0xfbffffff 0xfe800000-0xfeffffff
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Initializing USB Mass Storage driver...
scsi4 : usb-storage 1-4:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
pcmcia_socket pcmcia_socket0: cs: memory probe 0xfc000000-0xfe7fffff: excluding
0xfcf00000-0xfd17ffff 0xfde00000-0xfe07ffff
pcmcia 0.0: pcmcia: registering new device pcmcia0.0
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x300-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding
0xc0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding
0xa0000000-0xa0ffffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding
0x60000000-0x60ffffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
eth0: C-NET(PC)C, sram 4K TX*2, port 0x1100, irq 3, hw_addr 00:80:4c:xx:xx:xx
=> change to xx
udev: renamed network interface eth0 to eth16
scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] Attached SCSI removable disk
EXT3-fs (sda3): using internal journal
Adding 36443416k swap on /dev/sda5. Priority:-1 extents:1 across:36443416k
NET: Registered protocol family 10
eth16: no IPv6 routers present
[lspci -vvv]
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory
Controller Hub (rev 07)
Subsystem: Toshiba America Info Systems Device ff66
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
Subsystem: Toshiba America Info Systems Device ff66
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Region 0: Memory at d4400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 6140 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller (rev 07)
Subsystem: Toshiba America Info Systems Device ff66
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d7900000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device ff66
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 60c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device ff66
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 60a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 (rev 03) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Device ff66
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at dab05400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller (rev 03)
Subsystem: Toshiba America Info Systems Device ff66
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dab00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1
(rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00004000-00005fff
Memory behind bridge: d9b00000-daafffff
Prefetchable memory behind bridge: 00000000d4800000-00000000d58fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2
(rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d8a00000-d9afffff
Prefetchable memory behind bridge: 00000000d5900000-00000000d68fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5
(rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d7a00000-d89fffff
Prefetchable memory behind bridge: 00000000d6900000-00000000d78fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device ff66
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 6080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device ff66
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 6060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device ff66
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 6040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device ff66
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 6020 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 (rev 03) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Device ff66
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at dab05000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if
01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=05, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: d2000000-d40fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
Subsystem: Toshiba America Info Systems Device ff66
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller
(rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Toshiba America Info Systems Device ff66
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 6138 [size=8]
Region 1: I/O ports at 6154 [size=4]
Region 2: I/O ports at 6130 [size=8]
Region 3: I/O ports at 6150 [size=4]
Region 4: I/O ports at 6110 [size=16]
Region 5: I/O ports at 6100 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Toshiba America Info Systems Device ff66
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at dab05800 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 6000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller
(rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Toshiba America Info Systems Device ff66
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 6128 [size=8]
Region 1: I/O ports at 614c [size=4]
Region 2: I/O ports at 6120 [size=8]
Region 3: I/O ports at 6148 [size=4]
Region 4: I/O ports at 60f0 [size=16]
Region 5: I/O ports at 60e0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E
PCI Express Fast Ethernet controller (rev 02)
Subsystem: Toshiba America Info Systems Device ff66
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 4000 [size=256]
Region 2: Memory at d4810000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d4800000 (64-bit, prefetchable) [size=64K]
Capabilities: <access denied>
03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network
Adapter (PCI-Express) (rev 01)
Subsystem: Foxconn International, Inc. Device e009
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d8a00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
04:06.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b6)
Subsystem: Toshiba America Info Systems Device ff66
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=04, secondary=05, subordinate=05, sec-latency=176
Memory window 0: dc000000-dffff000 (prefetchable)
Memory window 1: e0000000-e3fff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
_______________________________________________
Linux PCMCIA reimplementation list
http://lists.infradead.org/mailman/listinfo/linux-pcmcia
