Hi, Xircom multi-function card still does not work.
Please see the attached dmesg log.
Best Regards
Komuro
----- Original Message -----
>Date: Mon, 13 Sep 2010 21:53:53 +0200
>From: Dominik Brodowski <li...@dominikbrodowski.net>
>To: Komuro <komurojun-...@nifty.com>
>Cc: linux-pcmcia@lists.infradead.org, linux-ser...@vger.kernel.org
>Subject: Re: Re: Re: Re: [PATCH 11/18] pcmcia: do not use io_req_t when
> calling pcmcia_request_io()
>
>
>Dear Komuro,
>
>does the attached patch help with 2.6.36-rc4?
>
>Best,
> Dominik
>
>commit 1852d6b8c3fa2d1765f66cd7d96a8c6bf9f01997
>Author: Dominik Brodowski <li...@dominikbrodowski.net>
>Date: Mon Aug 30 08:18:54 2010 +0200
>
> pcmcia serial_cs.c: fix multifunction card handling
>
> We shouldn't overwrite pre-set values, and we should also
> set the port address to the beginning, and not the end of
> the 8-port range.
>
> Reported-by: Komuro <komurojun-...@nifty.com>
> Signed-off-by: Dominik Brodowski <li...@dominikbrodowski.net>
>
>diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
>index 141c695..7d475b2 100644
>--- a/drivers/serial/serial_cs.c
>+++ b/drivers/serial/serial_cs.c
>@@ -335,8 +335,6 @@ static int serial_probe(struct pcmcia_device *link)
> info->p_dev = link;
> link->priv = info;
>
>- link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
>- link->resource[0]->end = 8;
> link->conf.Attributes = CONF_ENABLE_IRQ;
> if (do_sound) {
> link->conf.Attributes |= CONF_ENABLE_SPKR;
>@@ -411,6 +409,27 @@ static int setup_serial(struct pcmcia_device *handle, st
ruct serial_info * info,
>
> /*====================================================================*/
>
>+static int pfc_config(struct pcmcia_device *p_dev)
>+{
>+ unsigned int port = 0;
>+ struct serial_info *info = p_dev->priv;
>+
>+ if ((p_dev->resource[1]->end != 0) &&
>+ (resource_size(p_dev->resource[1]) == 8)) {
>+ port = p_dev->resource[1]->start;
>+ info->slave = 1;
>+ } else if ((info->manfid == MANFID_OSITECH) &&
>+ (resource_size(p_dev->resource[0]) == 0x40)) {
>+ port = p_dev->resource[0]->start + 0x28;
>+ info->slave = 1;
>+ }
>+ if (info->slave)
>+ return setup_serial(p_dev, info, port, p_dev->irq);
>+
>+ dev_warn(&p_dev->dev, "no usable port range found, giving up\n");
>+ return -ENODEV;
>+}
>+
> static int simple_config_check(struct pcmcia_device *p_dev,
> cistpl_cftable_entry_t *cf,
> cistpl_cftable_entry_t *dflt,
>@@ -461,23 +480,8 @@ static int simple_config(struct pcmcia_device *link)
> struct serial_info *info = link->priv;
> int i = -ENODEV, try;
>
>- /* If the card is already configured, look up the port and irq */
>- if (link->function_config) {
>- unsigned int port = 0;
>- if ((link->resource[1]->end != 0) &&
>- (resource_size(link->resource[1]) == 8)) {
>- port = link->resource[1]->end;
>- info->slave = 1;
>- } else if ((info->manfid == MANFID_OSITECH) &&
>- (resource_size(link->resource[0]) == 0x40)) {
>- port = link->resource[0]->start + 0x28;
>- info->slave = 1;
>- }
>- if (info->slave) {
>- return setup_serial(link, info, port,
>- link->irq);
>- }
>- }
>+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
>+ link->resource[0]->end = 8;
>
> /* First pass: look for a config entry that looks normal.
> * Two tries: without IO aliases, then with aliases */
>@@ -491,8 +495,7 @@ static int simple_config(struct pcmcia_device *link)
> if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
> goto found_port;
>
>- printk(KERN_NOTICE
>- "serial_cs: no usable port range found, giving up\n");
>+ dev_warn(&link->dev, "no usable port range found, giving up\n");
> return -1;
>
> found_port:
>@@ -558,6 +561,7 @@ static int multi_config(struct pcmcia_device *link)
> int i, base2 = 0;
>
> /* First, look for a generic full-sized window */
>+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
> link->resource[0]->end = info->multi * 8;
> if (pcmcia_loop_config(link, multi_config_check, &base2)) {
> /* If that didn't work, look for two windows */
>@@ -565,15 +569,14 @@ static int multi_config(struct pcmcia_device *link)
> info->multi = 2;
> if (pcmcia_loop_config(link, multi_config_check_notpicky,
> &base2)) {
>- printk(KERN_NOTICE "serial_cs: no usable port range"
>+ dev_warn(&link->dev, "no usable port range "
> "found, giving up\n");
> return -ENODEV;
> }
> }
>
> if (!link->irq)
>- dev_warn(&link->dev,
>- "serial_cs: no usable IRQ found, continuing...\n");
>+ dev_warn(&link->dev, "no usable IRQ found, continuing...\n");
>
> /*
> * Apply any configuration quirks.
>@@ -675,6 +678,7 @@ static int serial_config(struct pcmcia_device * link)
> multifunction cards that ask for appropriate IO port ranges */
> if ((info->multi == 0) &&
> (link->has_func_id) &&
>+ (link->socket->pcmcia_pfc == 0) &&
> ((link->func_id == CISTPL_FUNCID_MULTI) ||
> (link->func_id == CISTPL_FUNCID_SERIAL)))
> pcmcia_loop_config(link, serial_check_for_multi, info);
>@@ -685,7 +689,13 @@ static int serial_config(struct pcmcia_device * link)
> if (info->quirk && info->quirk->multi != -1)
> info->multi = info->quirk->multi;
>
>- if (info->multi > 1)
>+ dev_info(&link->dev,
>+ "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk:
>%p)\n",
>+ link->manf_id, link->card_id,
>+ link->socket->pcmcia_pfc, info->multi, info->quirk);
>+ if (link->socket->pcmcia_pfc)
>+ i = pfc_config(link);
>+ else if (info->multi > 1)
> i = multi_config(link);
> else
> i = simple_config(link);
>@@ -704,7 +714,7 @@ static int serial_config(struct pcmcia_device * link)
> return 0;
>
> failed:
>- dev_warn(&link->dev, "serial_cs: failed to initialize\n");
>+ dev_warn(&link->dev, "failed to initialize\n");
> serial_remove(link);
> return -ENODEV;
> }
serial_cs.log
Description: Binary data
_______________________________________________ Linux PCMCIA reimplementation list http://lists.infradead.org/mailman/listinfo/linux-pcmcia
