Hi Elazar
Finally i am able to make small prototype to enable tracepoints. :)
One more thing, is it possible to enable multiple tracepoints through
1 thread and
while parsing output find out to which tracepoint that raw data belongs.?
Or i would have to create separate thread for each tracepoint. ?
Man page says:
Set config to one of the following:
.........
So i am assuming i will have to create separate thread for each event.
Thanks a lot.
On 31 March 2015 at 23:37, Elazar Leibovich
<[email protected]> wrote:
> Look at the man page, you should set the type to PERF_TYPE_TRACEPOINT
> and set the config to the event id.
>
> On my system, sys_enter_open event id is 455
>
> $ sudo cat /sys/kernel/debug/tracing/events/syscalls/sys_enter_open/id
> 455
>
> Add PERF_SAMPLE_RAW to the sample_type.
>
> BTW
> You can compile the tar.gz I sent and echo JSON in the attr format to
> it, it'll print back perf data in json format. Easier to experiment
> with perf_event_open API than writing a C program.
>
> For example
>
> $ make
> $ sudo ./perf2 <<EOF
> {
> "attr": {
> "sample_type": [
> "PERF_SAMPLE_IP",
> "PERF_SAMPLE_RAW"
> ],
> "wakeup_events": 1,
> "config": 455,
> "sample_period": 1,
> "type": "PERF_TYPE_TRACEPOINT"
> }
> }
> EOF
> {"type":"PERF_RECORD_SAMPLE","misc":"PERF_RECORD_MISC_USER","sample":{"ip":"7f4f3625263d","data":[-57,1,0,0,7,11,0,0,2,0,0,0,0,0,0,0,-32,101,75,22,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]}}
> {"type":"PERF_RECORD_SAMPLE","misc":"PERF_RECORD_MISC_USER","sample":{"ip":"7f4f3625263d","data":[-57,1,0,0,7,11,0,0,2,0,0,0,0,0,0,0,-64,112,75,22,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]}}
> {"type":"PERF_RECORD_SAMPLE","misc":"PERF_RECORD_MISC_USER","sample":{"ip":"7f4f3625263d","data":[-57,1,0,0,7,11,0,0,2,0,0,0,0,0,0,0,-112,70,75,22,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]}}
> {"type":"PERF_RECORD_SAMPLE","misc":"PERF_RECORD_MISC_USER","sample":{"ip":"7f4f3625263d","data":[-57,1,0,0,7,11,0,0,2,0,0,0,0,0,0,0,-32,70,75,22,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]}}
> {"type":"PERF_RECORD_SAMPLE","misc":"PERF_RECORD_MISC_USER","sample":{"ip":"7f4f3625263d","data":[-57,1,0,0,7,11,0,0,2,0,0,0,0,0,0,0,0,-99,26,-19,-1,127,0,0,0,0,0,0,0,0,0,0,-74,1,0,0,0,0,0,0,0,0,0,0]}}
> ...
>
> What is the raw data? Depends on the event. For sys_enter/exit it is
> struct syscall_trace_enter/exit.
>
> http://osxr.org/linux/source/kernel/trace/trace.h#0095
> struct trace_entry {
> unsigned short type;
> unsigned char flags;
> unsigned char preempt_count;
> int pid;
> };
> struct syscall_trace_enter {
> struct trace_entry ent;
> int nr;
> unsigned long args[];
> };
>
> How did I know that? I followed the kernel logic here:
>
> http://osxr.org/linux/source/kernel/trace/trace_syscalls.c#0636
> static void perf_syscall_exit(void *ignore, struct pt_regs *regs, long ret)
> {
> ...
> rec = (struct syscall_trace_exit *)perf_trace_buf_prepare(size, ...);
> ...
> }
>
> Note that indeed after short+char+char+int we have 2, the open syscall
> number in all event's raw data.
>
> On Tue, Mar 31, 2015 at 6:22 PM, sahil aggarwal <[email protected]> wrote:
>> Actually i need most of the sampling around PERF_TYPE_TRACEPOINT,
>> so if i enable tracepoint "syscalls/sys_enter_open/" what will be the "type"
>> field in perf_event_header.? And, the the record struct will be same as given
>> in "syscalls/sys_enter_open/format" .?
>>
>> Thanks
>>
>> On 31 March 2015 at 20:40, sahil aggarwal <[email protected]> wrote:
>>> Yeah that was clear enough.
>>> Thanks a lot. Your code is of great help.
>>>
>>> Regards
>>> Sahil
>>>
>>> On 31 March 2015 at 19:45, Elazar Leibovich
>>> <[email protected]> wrote:
>>>> I wanted to ensure the user always see contiguous array of data from
>>>> the ring buffer.
>>>>
>>>> The last piece of data, say "abcde" could wrap around in the ring
>>>> buffer and appear like:
>>>>
>>>> [de... ...abc]
>>>>
>>>> I wanted the user to see a contigious array of the form [abcde].
>>>>
>>>> So in the case I'm having input that wrap around, I'll simply copy it
>>>> to the first buffer
>>>>
>>>> [wrap_buffer][de.. ...abc]
>>>> would become
>>>> [ abc][de... ...abc]
>>>>
>>>> And then I'll the user pointer to the leftmost "a", and he'll see
>>>> "abcde" without knowing he's handling a ring buffer.
>>>>
>>>> Let me know if I was clear enough.
>>>>
>>>> On Tue, Mar 31, 2015 at 2:18 PM, sahil aggarwal <[email protected]>
>>>> wrote:
>>>>>
>>>>> Hi Elazar
>>>>>
>>>>> Can you help me understand why you have used
>>>>> mmap_pages->wrap_base.? And, instead of allocating
>>>>> (2^n)+1 pages you allocate (2^n)+2 pages, why so.?
>>>>> wrap_base points to (2^n)+2 pages and base points to
>>>>> (2^n)+1 pages, what is use of wrap_base.? I tried reading
>>>>> perf source too, there it seems they use (2^n)+1 pages only.
>>>>>
>>>>>
>>>>> Thanks
>>>>> Regards
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-perf-users"
>> in
>> the body of a message to [email protected]
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-perf-users" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
