Hi: I am trying to get information about the servers, using ipmi-sensor. But, lots of the information are N/A, which means the type of sensors are not enabled. Is the sensor by default not enabled or how should I enable them?
The server is bought from Dell, actually. Can anyone help me? Thanks, The following is what I get using ipmi-sensors: [r...@gr3 ~]# ipmi-sensors --sensor-types=voltage ID | Name | Type | Reading | Units | Event 8 | VCORE | Voltage | N/A | N/A | 'State Deasserted' 9 | VCORE | Voltage | N/A | N/A | N/A 10 | 0.75 VTT CPU2 PG | Voltage | N/A | N/A | N/A 11 | 0.75 VTT CPU1 PG | Voltage | N/A | N/A | 'State Deasserted' 13 | 1.5V PG | Voltage | N/A | N/A | 'State Deasserted' 14 | 1.8V PG | Voltage | N/A | N/A | 'State Deasserted' 15 | 3.3V PG | Voltage | N/A | N/A | 'State Deasserted' 16 | 5V PG | Voltage | N/A | N/A | 'State Deasserted' 17 | MEM PG | Voltage | N/A | N/A | N/A 18 | MEM PG | Voltage | N/A | N/A | 'State Deasserted' 19 | VTT | Voltage | N/A | N/A | N/A 20 | VTT | Voltage | N/A | N/A | 'State Deasserted' 21 | 0.9V PG | Voltage | N/A | N/A | 'State Deasserted' 22 | 1.8 PLL PG | Voltage | N/A | N/A | N/A 23 | 1.8 PLL PG | Voltage | N/A | N/A | 'State Deasserted' 24 | 8.0 V PG | Voltage | N/A | N/A | 'State Deasserted' 25 | 1.1 V PG | Voltage | N/A | N/A | 'State Deasserted' 26 | 1.0 LOM PG | Voltage | N/A | N/A | 'State Deasserted' 27 | 1.0 AUX PG | Voltage | N/A | N/A | 'State Deasserted' 28 | PFault Fail Safe | Voltage | N/A | N/A | Unknown 29 | 1.05 V PG | Voltage | N/A | N/A | 'State Deasserted' 51 | Voltage 1 | Voltage | 210.00 | V | 'OK' 52 | Voltage 2 | Voltage | N/A | V | Unknown Regards,
_______________________________________________ Linux-PowerEdge mailing list Linux-PowerEdge@dell.com https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
