I've got an R300 that is running current centos 5 kernel 2.6.18-194.3.1.el5 x86_64 and just stock hardware including built-in NIC:
Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Using the stock centos tg3 driver. Are thre any known issues with this setup? I can't get it to do better than about 300 Mbit/sec using iperf on a full duplex gig link to another server with no issues saturating a gig link using the same test on the same switch, same vlan, no routing involved. Thanks, David _______________________________________________ Linux-PowerEdge mailing list Linux-PowerEdge@dell.com https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq