Rainer, In the initial observations which you shared most of the OM services were not running.
Please try to : 1. restart the OM services and see if this resolves the problem. 2. If #1 doesn't resolve, then reinstall OM and check. Better to check if all the OM rpms are installed. Thanks , Raghavendra. B -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Rainer Traut Sent: Wednesday, August 11, 2010 2:36 PM To: linux-poweredge-Lists Subject: Re: OMSA 6.3 from dell repo - no controller found Am 11.08.2010 10:34, schrieb Dirk Gfroerer: > Rainer, > >> first PE2950III tried: >> - going back to OMSA6.2 solves it immediately, with both megaraid drivers >> - never shows the controller in OMSA 6.3, I tried with and without >> megaraid_sas update, OMSA 6.3 32bit and OMSA 6.3 64bit >> - even with OMSA6.3 64bit live cd the controller is not found >> >> second PE2950III (it's almost identical hw, even rpm packages installed >> only less RAM): >> - works fine with OMSA6.2 >> - with OMSA6.3 32 and 64bit only finds controller, if stock RedHat >> driver is used (this is contrary to what dell suggests) > how much RAM do you have installed in your servers? Mine has 16GB. > > Dell Support is also looking at my issue. So far they have not been able > to reproduce. On my system the controller does not show up when booting > from the Live CD, too. > > Kind Regards, > Dirk Hi Dirk, same here, dell is not able to reproduce so far. Small correction with RAM, the first one has less, 8GB to the second with 16GB. Rainer _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
