Hi Diego, What RAID Controller are you using? Does it happen to be a H200 or H700? or is it the SAS PERC6 iR?
Debian has known problems with the Hx00 serie, the drivers for these raid controllers are integrated in the new Debian Squeeze, yet unfortunately not in 5.0.5 yet. Never had any problems installing a PERC6 with Debian. Hope this helps, Best regards, Joep Gottlieb **Contact** E-mail Personal: **j...@i3d.net** <mailto:j...@i3d.net> E-mail General: **i...@i3d.net** <mailto:i...@i3d.net> E-mail Administration: **backoff...@i3d.net** <mailto:backoff...@i3d.net> E-mail Server Admin: **serverad...@i3d.net** <mailto:serverad...@i3d.net> Website: **http://www.i3d.net** * Post address*: Meent 93b 3011 JG Rotterdam Netherlands * **Also visit our forum: *****http://forum.i3d.net** <http://forum.i3d.netl/> Op 1-9-2010 16:03, Diego Andrés schreef: > Hello, > > I'm trying to install lenny on a Poweredge R610. I'm using lenny 5.0.5 > amd64 without any success. The installer could detect the network > interfaces when I put the bnx2 firmware in a USB stick. But the > installer can't detect any disk. I have configured a RAID 1 array with > two 136Gb. My BIOS version is 2.1.9. Can you help me please? Apart of > that I have to install Xen on the machine. Someone has had a good > exprience doing that? > > Best regards, > > Diego Andrés. > > _______________________________________________ > Linux-PowerEdge mailing list > Linux-PowerEdge@dell.com > https://lists.us.dell.com/mailman/listinfo/linux-poweredge > Please read the FAQ at http://lists.us.dell.com/faq
_______________________________________________ Linux-PowerEdge mailing list Linux-PowerEdge@dell.com https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq