I usually just ssh to the DRAC IP to run racadm commands
Cameron Smith Technical Operations Manager Network Redux, LLC 5200 SW Macadam Ave Ste 450 Portland, Oregon 97239 Cell: 503-926-4928 On Thu, May 5, 2016 at 4:16 PM, Adonis Peralta <doni...@gmail.com> wrote: > For the life of me I can’t figure out how to connect to the iDRAC6 (racadm > login) (Im on a Dell R710 - iDRAC6 Enterprise) via the serial port. I go > into the bios and have Serial with Console Redirection to COM2. I then > Enable RACADM serial via the web gui. I then proceed to try to connect to > the COM2 serial port via minicom and I just keep getting nothing. Minicom > says not connected - Just a blank screen. I followed the manual and > performed the <Esc> + <Shift> <9> command and nothing. I also went into the > bios and remove the console redirection so that it’d just say Serial > enabled without console redirection. I then set external console port to > COM2 and still nothing. Same problem. > > I am not trying to connect to the serial console (a display of what the OS > has). I want to serial into the iDRAC itself so that I can run the racadm > commands. Looking at the manual it implies this can be done but nothing I > am trying works. > > Thanks, > Adonis > _______________________________________________ > Linux-PowerEdge mailing list > Linux-PowerEdge@dell.com > https://lists.us.dell.com/mailman/listinfo/linux-poweredge >
_______________________________________________ Linux-PowerEdge mailing list Linux-PowerEdge@dell.com https://lists.us.dell.com/mailman/listinfo/linux-poweredge