Dell - Internal Use - Confidential Hi Neil, Is it possible to AC cycle the system? Both systems have same iDRAC, Inlet Temperature sensor must work unless sensor itself has some issue. Could you capture FAN RPMs from both the systems and send it across?
-Rajesh -----Original Message----- From: linux-poweredge-bounces-Lists On Behalf Of Neil Millar Sent: Tuesday, May 24, 2016 4:23 PM To: linux-poweredge-Lists Subject: [Linux-PowerEdge] R730xd inlet temp sensor not working Hi, We have 2 R730xd servers that were delivered at the same time. One seems to be unable to display the inlet temperature. The working one gives: #ipmitool sdr type temp Inlet Temp | 04h | ok | 7.1 | 21 degrees C Exhaust Temp | 01h | ok | 7.1 | 41 degrees C Temp | 0Eh | ok | 3.1 | 53 degrees C Temp | 0Fh | ok | 3.2 | 50 degrees C the second: #ipmitool sdr type temp Inlet Temp | 04h | ns | 7.1 | No Reading Exhaust Temp | 01h | ok | 7.1 | 42 degrees C Temp | 0Eh | ok | 3.1 | 50 degrees C Temp | 0Fh | ok | 3.2 | 52 degrees C and the idrac web interface says: System Board Inlet Temp Information Not Available I have updated all the drivers etc. for the one that isn't working but that didn't change anything. Is there any known issues with these, or other tips on getting the inlet temp displaying some sensible values? Thanks, Neil _______________________________________________ Linux-PowerEdge mailing list Linux-PowerEdge@dell.com https://lists.us.dell.com/mailman/listinfo/linux-poweredge
_______________________________________________ Linux-PowerEdge mailing list Linux-PowerEdge@dell.com https://lists.us.dell.com/mailman/listinfo/linux-poweredge
