Hi, Incomplete battery learn cycles will be fixed in the new FW which is out since this week: "- Learn Cycle failing as "incomplete" No need for a call, or tell me the service tag and I can open and close one for my perf. statistic. Message can be ignored until the unit says "optimal" Update: http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&; releaseid=R242527&SystemID=PWV_MD3000I&servicetag=&os=WNET&osl=en&device id=12883&devlib=0&typecnt=0&vercnt=7&catid=-1&impid=-1&formatcnt=2&libid =49&fileid=350729
New MDSM on the Ressource CD: http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&; releaseid=R242364&SystemID=PWV_MD3000I&servicetag=&os=WNET&osl=en&device id=12882&devlib=0&typecnt=0&vercnt=7&catid=-1&impid=-1&formatcnt=1&libid =52&fileid=350400 Fixes: - New OS support for Windows 2008 R2 Server, SLES 11, SLES 10 U3, RHEL 4.8, RHEL 5.4. - Modular Disk Storage Manager enhancements. Additionally, the following issues have been fixed: - Excessive Destination Driver Errors with no component listed on 2nd gen firmware - BBU Learn Cycle fails in Simplex mode - Learn Cycle failing as "incomplete" - NX1950 Solution losing connectivity to every device on the network - Hitachi SATA HDD firmware failing to update - ESX host with CHAP enabled causes reboot loop when updating to 2nd gen firmware. - MPP Virtual HBA Driver issue with Oracle ASM - 2nd gen firmware upgrade utility does not display double byte characters properly -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mike Hanby Sent: Freitag, 9. Oktober 2009 15:50 To: 'Morten W. Petersen'; linux-poweredge-Lists Subject: RE: MD3000i alerts Did you ever get any responses to this query? I just got the same set of alerts from my md3000i last night. I never did get a message indicating recovery, however SMclient reports the array is optimal. I was going to give Dell a call, but figured I'd check here first. Summary Node ID: md3000i-01 Host IP Address: localhost.localdomain/127.0.0.1 Host ID: localhost.localdomain Event Error Code: 7300 Event occurred: Oct 9, 2009 12:03:26 AM Event Message: Battery backup unit overheated Component type: Battery Pack Component location: Enclosure 0 Summary Node ID: md3000i-01 Host IP Address: localhost.localdomain/127.0.0.1 Host ID: localhost.localdomain Event Error Code: 730f Event occurred: Oct 9, 2009 12:03:36 AM Event Message: Incomplete battery learn cycle Component type: Battery Pack Component location: Enclosure 0 Summary Node ID: md3000i-01 Host IP Address: localhost.localdomain/127.0.0.1 Host ID: localhost.localdomain Event Error Code: 730f Event occurred: Oct 9, 2009 12:03:37 AM Event Message: Incomplete battery learn cycle Component type: Battery Pack Component location: Enclosure 0 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Morten W. Petersen Sent: Sunday, August 30, 2009 12:38 PM To: [email protected] Subject: MD3000i alerts Hi, I have an MD3000 running, and got these alerts. Do I need to do anything? -Morten -- Morten W. Petersen Manager Nidelven IT Ltd Phone: +47 45 44 00 69 Email: [email protected] _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
